1. Home
  2. 2094136045

By Speck Pumps

Details

Top

Part # 2094136045

Warranty 12 Months

Manufacturer Code IG156-1100T-000

Alternate Part #'s ES90-II, IG156-1100T-000

Product Description

 

Swimming Pool Pump

The Speck Model ES90 medium head pump has been engineered for durability and quiet performance. This all-plastic, self-priming pump with large basket is ideally suited for small to medium in-ground pools. The Model ES90 is designed using 100% recyclable "environment friendly" plastics.

Features:

  • This high performance, medium head pump comes complete with an industry standard 5/8" mechanical seal for convenient replacement.
  • Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 150° F.
  • All models are equipped with quick disconnect unions for easy installation and replacement. Comes standard with 2" suction and 1.5"/2" discharge.
  • For pool users' safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
  • Specially constructed clear lid with ring lock design is easy to open. Large strainer basket is always locked in place.
  • Pump is equipped with durable, economical 48 frame motor. Dual voltage motor has two compartments with sealed contacts, stainless steel shaft and Neptune ® Advanced Switch Technology.
  • Variety of cords sets are available.
  • The Model ES90 comes complete with a full 12 month warranty.
  • Every pump is performance tested before leaving the Speck factory.

 


Speck

 

Speck

Product Specifications

HP:
1 HP
Speed:
Single
Max Pool Size:
2 gal.
Union Connectors:
Included
Weight:
31 lbs.
Service Factor:
1.0
Port Size:
2 in.
Volts:
115/230 V
Top
Ask A Question

?     Asked on 5/22/2016by Inyo Visitor

Will this pump hook up to same plumbing as Waterco model 112400 super tuff or do you have the Waterco pump
 Reply

A  Answered on 5/22/2016 by InyoPools Product Specialist Patrick P.

This pump could be used in place of the Waterco Super Tuff however we do not have the exact plumbing and electrical specs of the Waterco pump. This pump uses 2" plumbing and can wired either 115V or 230V, you may have a bit a re-plumbing if you use this pump as the plumbing port locations are in a different spot then your Waterco pump. We are not aware of a pump that has the exact same port locations as the older Waterco pump.
 Reply


?     Asked on 7/12/2016by M.Gonzales

What size motor do I need for a pool size 18x36-22000-to 27000 gallons of water. The installer used a one horse power three years ago and have lots of problems with circulation and Algea. Ilike your product is quiet but I need help.
 Reply

A  Answered on 7/17/2016 by InyoPools Product Specialist Lennox H.

Hi, If You can provide us with the "feet of head" calculation of your pool and the size of your filter we can calculate what size pump you need for your pool.  You can also follow the steps in our How To: Size a Pool Pump guide for addition info.
 Reply


?     Asked on 6/8/2017by RICHARD SCHEERINGA

Looking @ ES90-11 pool pump for replacement of my E90-11. Says max pool size is 2 gal ??? Must be an error. Ihave a 27000 gal in-ground.
 Reply

A  Answered on 6/8/2017 by InyoPools Product Specialist Patrick P.

This will work on a pool up to 30,000 gallons
 Reply


?     Asked on 5/19/2019by Joseph Passarelli

is this pump good for a semi in ground pool 12 x 24 ?
 Reply

A  Answered on 5/20/2019 by InyoPools Product Specialist Michelle B.

Hello, We would not be able to recommend a pool pump until we have some more information on your pool.Please review our article on how to size a pool pump. http://www.inyopools.com/HowToPage/how_to_size_a_pool_pump_for_your_in_ground_pool_.aspx
 Reply