$11.37

Qty:

By Cinderella Inc.


Details

Top

Model # CLIP2

Alternate Part #'s CLIP2P

Product Description

Cinderella Coping - Non Skid Clip for CP2

Top

?     Asked on 5/29/2016by Gary

Do you have the Cinderella clips that are angled. I have an older octagon shaped pool and am missing several clips on the corners that connect the coping. These clips have 2 screw holes on either side and screw into the coping.
 Reply

A  Answered on 6/4/2016 by InyoPools Product Specialist Lennox H.

Hi Gary, These are the only clips Cinderella has listed for the CP2 coping. They do not have the clip that you've described.
 Reply


?     Asked on 6/8/2016by Norma Hathaway

Can u use this on intex pools
 Reply

A  Answered on 6/8/2016 by InyoPools Product Specialist Charlie R.

Norma,No, unfortunately you can only use the Cinderella coping for inground pools.
 Reply


?     Asked on 6/4/2017by Rob

I have an old spartan pool with painted white aluminum coping and the clips that go over the seams are breaking. Will this clip replace the ones from my pool... or can you suggest anything else? Thanks.
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Alex V.

Rob, This clip will only work with the CP2 coping. Do you know what model coping you have?
 Reply


?     Asked on 10/22/2018by Allen

Cinderella coping - how flexible is the aluminum. I’m putting a new liner in my pool and the railings holding up the liner is slightly curved and are about 3 inches across.
 Reply

A  Answered on 10/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Allen. This coping clip is not flexible. This clip is 2" W x 2-1/4" D. 
 Reply


?     Asked on 4/15/2019by pat fuller

do you have 1 1/2 coping clips
 Reply

A  Answered on 4/20/2019 by InyoPools Product Specialist Lennox H.

Hi, Pat. We do not have any other size option for this CP2 Coping  Clip.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Missing clips for Cinderella coping

Written on 8/21/2022 by Guest

Locate section with missing clip
Push clip onto coping - if clip is too tight or too lose,
gently bend clip by hand to fit.
Push clip on coping by hand until it clips on.
If necessary, tap on with side of fist or rubber mallet to set.
Look at how nice it is to not have to see coping seams!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

caulk gun, scraper

Old clips were broken/missing

Written on 8/4/2022 by Guest

Removed old clips that were there. New ones snapped on to coping for a perfect fit. Did use a little bit of marine adhesive to help hold clips to coping.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
7 Rating
5 star:
 
(7)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews