By Cinderella Inc.
Model # CP28X2
Manufacturer Code CP2P8X2
CINDERELLA CP2 COPING
Features:
Technical Spes:
I have an oval pool that is 17 feet in diameter on the oval end. Can this be bought with a curve for the two 17 foot ends. I would also require an additional two pieces of the 8 foot straight as I already have 4 straights.
Reply
Yes, You would need 8 radius pieces at 8'6" each. To order that radius please call customer service at 407-834-2200 and reference Q&A ID 61368
Reply
Can I assume that this fits over a coping that is 2 inches diameter? Is it applied with glue, or does it self adhere with the little finger at the top?
Reply
Peter, The CP-2 coping profile is a vinyl receiver which is installed on the top of the pool wall with self-tapping screws. This product can only be installed on a new construction pool or a renovation where the new concrete deck will be poured.
Reply
I have trying to get CP2 coping for a 30' round pool we are putting in-ground. Do you have coping that would work for a round pool?
Reply
A 30 ft. pool would use a 15ft radius coping. That is item # CP2PR1500 and is 91" long. A full perimeter 30ft pool would require 13 pieces. You will also need coping clips item # CLIP2P 30 ea. and a box of screws item TEKS 1 ea. This is not a common radius, it would need to be made to order, and can not be canceled or returned after the order is placed. You should confirm the actual radius of the pool when it is finished before you order the coping. If you are trying to install a standard above ground pool and sink it in the ground this item will probably not work for you. Please contact InyoPools support at https://secure.inyopools.com/Support/SupportRequest.aspx and they will assist you in providing the quote.
Reply
I have an 18ft round stealth pool and I need the bullnose coping. Can you tell me what to order please?
Reply
Hi Melinda, The item number you have listed (cp2p8x2) will not work for a radius pool. I don't know what a Stealth pool is but if the pool is a true 18ft round it would need 9ft radius coping. Each piece of our 9ft radius coping is 91" long. That item is # CP2PR0900. You might also need a box of self tapping screws item # teks and a clip to cover each joint item # clip2p. I would suggest you confirm the actual radius of your pool before you order this coping. Many manufacturers use a standard measurement in their description but the pool may measure to different specifications at the install. Due to high demand and supply delays we are currently out of the 9ft radius coping and do not expect to have it until late May to early June. I hope this information helps. Thanx T
Reply
