$3,204.95

Qty:

By Hayward Pool Products


Details

Top

Part # CATPP2000

Warranty 5-Year Limited Warranty on Controller, 2-Year Warranty on Sensors

Alternate Part #'s CAT-PP-2000, CAT-PP2000

Product Description

Automated water quality solution for pools, spas, water parks and more, world-wide.

The CAT 2000 continuously monitors pH and sanitizer activity, constantly adjusting the feeding of chemicals on a basis proportional to the demand. The results include the elimination of “human error”, accurate and reliable maintenance of chemical levels twenty-four hours a day, compliance with Health Department chemistry standards, reduced burden on operating staff, and a reduction of chemical usage and costs. 

  • Simple installation, setup and operation
  • Compatible with all types of chemical feed equipment
  • 5-year limited warranty on controller; 2-year warranty on sensors
  • Factory-assembled system includes: controller, sensors, machined acrylic flow cell, rotary flow sensor and PVC backboard 
  • NSF/ANSI Standard 50 Certified

 

Enclosed in the packaging, you should find all of the following:

  • (1) CAT 2000 Water Chemistry Controller
  • (1) Professional Series pH Sensor with 24” Cable and BNC Connector
  • (1) Professional Series ORP Sensor with 24” Cable and BNC Connector
  • (2) BNC Connector Protective Covers (Remove to Connect Sensors)
  • (2) Sensor Storage Containers
  • (1) CAT 2000 Owner’s Manual

The CAT 2000 Pro-Pack includes the following additional items:

  • (1) PVC Backboard with Mounting Holes and Stainless Hardware
  • (1) Machined Acrylic Flow Cell assembled with:
  • (3) 1/4” NPT x 3/8” Tubing Asahi Ball Valves
  • (1) Rotary Flow Sensor with Cable and Specialty Connector
  • (1) 30’ Roll, Blue Poly Installation Tubing (3/8” OD)
  • (2) 1/4” NPT x 3/8” Tubing True-Seal Connectors
  • (1) Pro-Pack Quick Start Guide

 

The CAT 2000 controller unit scans and interprets the signals from the pH and ORP probes, displays water quality readings in digital format, and activates chemical feeders in proportion to the demand required to maintain setpoint pH and ORP levels. The unit incorporates audible and visual safeguard alarms for out of range conditions, calibration adjustment for pH, and mode selections to manually feed or disable feeding for either channel. The CAT 2000 controller unit also features an internal micro-computer for unsurpassed accuracy, adaptability, and ease of use. All user-entries and adjustments are made through the touch-screen interface front panel.

The Flow Cell provides a convenient location for mounting the pH, ORP and Flow Sensor while ensuring ideal hydraulic conditions to maximize sensor performance and life.

The Flow Sensor (required) monitors the rate of flow across the pH and ORP sensors and signals the controller to disable automated chemical feeding during periods when the filtration system is off or low recirculation flow is detected.

The Professional-Series pH Sensor samples water from the filtration system and sends signals to the controller indicating the acidity of the water. The ideal pH range for pools and spas is 7.4 - 7.6. The CAT 2000 controller is preset from the factory to maintain pH 7.5. If pH is maintained below 7.4 (too acidic), eye irritation, corrosion of equipment, and damage to the pool or spa surface can occur. If pH is maintained above 7.6 (too alkaline), sanitizer activity is reduced, water may become cloudy, and eye irritation may result.

The Professional-Series ORP Sensor samples water from the filtration system and sends signals to the controller indicating the oxidation-reduction potential (redox) of the water. ORP is an actual measure of sanitizer activity (chlorine, bromine, ozone, etc.) and bacteriological water quality rather than an expression of chemical residual levels. The CAT 2000 controller is preset from the factory to maintain ORP at 650 millivolts.

 

CAT 2000 SPECIFICATIONS
Display Range pH 1.0 - 9.95
ORP 5 - 995 mV
Setpoint Range pH 7.0 - 8.0
ORP 200 - 995 mV
Control Accuracy pH +/- 0.1 pH
ORP +/- 5.0 mV
Mode Selections pH Automatic / Off / Manual
Proportional or Direct Feed
ORP Automatic / Off / Manual
Proportional or Direct Feed
pH Feed Acid or Base Feed
pH Mode Auto / Set / Calibrate
ORP Mode Auto / Set
Safety Systems pH Audible / Visual Safeguard Alarms
Adjustable Overfeed Timer
pH Priority Control
ORP Audible / Visual Safeguard Alarms
Adjustable Overfeed Timer
Controller Unit Diagnostic Self-Test
Required Rotary or Pressure Flow Sensor
Optional Remote Alarm
Outputs pH Feed 4 Amp, 120/230 VAC
4 Amp, Dry Contact
ORP Feed 4 Amp, 120/230 VAC
4 Amp, Dry Contact
Remote Alarm 4 Amp Dry Contact
Serial RS232 Serial Interface
Power Requirements USA 15 Amp, 120 VAC 60 HZ
International 10 Amp, 230 VAC 50/60 HZ

 

Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)