$30.01

Qty:

Details

Top

Model # P17005DE

Alternate Part #'s PSOP17005DE, PTWB-602POUCH

Product Description

Stabilizer (Cyanuric Acid)  
Stabilizer keeps chlorine in your swimming pool longer, prolonging the life of chlorine. Pool Solutions Stabilizer helps reduce the loss of chlorine due to direct sunlight by as much as 25%.
  • 4 lb container
  • Maintain cyanuric levels 30 to 50 ppm for maximum results
  • Complete instructions for dosage on container
  • Cuts chlorine loss by up to 25%

*Packaging may vary from image*

Desired CYA increase                    Amount of Stabilizer needed to increase Cyanuric Acid                                                                
                                                Pool volume in gallons
1,000 5,000 10,000 15,000 20,000 25,000 50,000
10 ppm 1 1/4 oz. 6 1/2 oz. 12 3/4 oz. 1 1/4 lbs. 1 2/3 lbs. 2 lbs. 4 lbs.
20 ppm 2 1/2 oz. 12 3/4 oz. 1 3/4 lbs. 2 1/2 lbs. 3 1/3 lbs. 4 lbs. 8 1/3 lbs.
30 ppm 2 1/2 oz. 11 oz. 1 1/3 lbs. 2 lbs. 2 2/3 lbs. 3 1/3 lbs. 12 1/2 lbs.
40 ppm 3 oz. 10 oz. 1 1/4 lbs. 2 lbs. 2 1/2 lbs. 3 1/4 lbs. 16 2/3 lbs.
50 ppm 6 1/2 oz. 2 lbs. 5 1/4 lbs. 6 1/4 lbs. 8 1/3 lbs. 10 1/2 lbs. 21 lbs.

*Product should be added to a bucket of water and mixed. Once product has begun to pre-dissolve, slowly pour it along the perimeter of the swimming pool. The filter and pump should be running anytime chemicals are added to the swimming pool. 


For More Pool Chemicals

Product Specifications

Type:
Stabilizer/Cyanuric Acid
Weight:
4 lbs.
Top

?     Asked on 10/18/2012by Guest

Each year when I open my pool, the chlorine demand is very high. This year I needed 41 lbs of shock. The water is balanced when the pool is closed and is covered the whole off season. I do not have any contaminants entering the pool. Can you give me any ideas?
 Reply

A  Answered on 10/18/2012 by InyoPools Product Specialist Patrick P.

Without a full water analysis and more information about the swimming pool, it is difficult to diagnose. The swimming pool should be shocked at least once every 7-10 days. You would likely be using 1 bag per 10,000 gallons of pool water. Aside from that I would recommend checking the cyanuric acid level as an imbalance can cause the swimming pool to use more chlorine.
 Reply


?     Asked on 12/20/2012by Guest

If I'm not getting a Cyanuric Acid reading with my test, does that mean there is no conditioner in the pool?
 Reply

A  Answered on 12/20/2012 by InyoPools Product Specialist Patrick P.

Things such as temperature, pH, alkalinity and calcium can cause false readings. Your best gauge for determining whether you have sufficient Cyanuric Acid levels is whether or not your pool is holding proper chlorine levels.
 Reply


?     Asked on 7/17/2020by Inyo Visitor

Does this come as a liquid or powder?
 Reply

A  Answered on 7/17/2020 by InyoPools Product Specialist Lennox H.

Hi. This is a granulated product. It is available in a liquid form which is P/N 07401.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Cyanuric Acid level was marginal

Written on 8/19/2019 by Mack

Added 4 Lb. Jar of Stabilizer to my 30,000 gal in-ground gunite pool. This raised my Stabilizer level from 35 ppm to 60 ppm. Now my chlorine level does not burn off as quickly on sunny days with the cover off

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.6  out of 5 stars)
25 Rating
5 star:
 
(18)
4 star:
 
(5)
3 star:
 
(1)
2 star:
 
(1)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews