$97.82

Qty:

Details

Top

Model # P37050DE

Product Description

Calcium Increaser  
Pool Solutions Calcium Plus Pool Solutions Calcium Plus increases water hardness whennecessarytopreventpoolwater from becoming corrosive to plumbing and damage to pool surface. The most important step in pool maintenance is keeping the pool water balanced.
  • Compares To BioGuard Balance Pak 300
  • Calcium chloride
  • Recommended Calcium hardness levels between 150 ppm and 250ppm
  • Complete instructions for dosage on container
Desired Increase                             Amount needed to increase Calcium Hardness                                                                  
                                                   Pool volume in gallons
  1,000 5,000 10,000 15,000 20,000 25,000 50,000
10 ppm 2 oz. 10 oz. 1 1/4 lbs. 1 3/4 lbs. 2 1/2 lbs. 3 1/4 lbs. 6 1/4 lbs.
20 ppm 4 oz. 1 1/4 lbs. 2 1/2 lbs. 3 3/4 lbs. 5 lbs. 6 1/4 lbs. 12 1/2 lbs.
30 ppm 6 oz. 1 3/4 lbs. 3 3/4 lbs. 5 1/2 lbs. 7 1/2 lbs. 9 1/2 lbs. 18 3/4 lbs.
40 ppm 8 oz. 2 1/2 lbs. 5 lbs. 7 1/2 lbs. 10 lbs. 12 1/2 lbs. 25 lbs.
50 ppm 10 oz. 3 lbs. 6 1/4 lbs. 9 1/2 lbs. 12 1/2 lbs. 15 3/4 lbs. 31 1/4 lbs.

*Caution: Do not add more than 10 lbs. per 10,000 gallons of water at one time. If the pool needs more than this, add the 10 lbs./10,000 gallons amount then retest 12 hours later. After testing, you can make the necessary adjustments.


For More Pool Chemicals

Product Specifications

Type:
Calcium
Weight:
50 lbs.
Top

?     Asked on 12/19/2012by Guest

I just had my swimming pool water tested and I was told that my calcium level is really high. What chemical would I use to lower it?
 Reply

A  Answered on 12/19/2012 by InyoPools Product Specialist Patrick P.

If the calcium level is too high, the only way to lower it would be to partially drain and refill the swimming pool.
 Reply


?     Asked on 5/18/2021by Inyo Visitor

How much product is needed to get a very low to normal in a 17000 gal pool
 Reply

A  Answered on 5/18/2021 by InyoPools Product Specialist Danny R.

Your pool should be at 150ppm - 250ppm.  Assuming you need to raise your pool 150ppm you would need the 50 lb bucket to increase it 150pm.  This would use 30lbs of hardness increaser.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)