$33.58
Part # 10139
Base Plate (Single)
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
can you possible tell me what model pool this plate came on i have the pool but missing some of the bottom channel rails that fit in this
Reply
Hi Curtis. I checked with a few sources and cannot tell if this was made for one pool in particular. We sell a lot of them so it must be for a fairly common model. If you have an idea (model #) what rails you might need maybe I can look further. Thank you for the inquery and sorry I couldn't be of more assistance.
Reply
I matched the base plates i needed (10139) Wilbur and I need the bottom rails 38" long x5/8x15/16. The pool is a 12x18 with 48" walls. No name on pool. Pool is about 17 years old. Need the order number for bottom rails. thank you
Reply
Hi Pete. If you could send some photos of the rails, wall and caps that might help up figure out what you need. If you can look under one of the caps or plates and see if there's a part number. You can send the photos via this email and put "Bob" in the subject line. Thank you and best of luck.
Reply
