$16.29
Part # 1030033F00
Ledge Cover - Gray (single)
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
I have been looking for a replacement top cover for an aquasphere pool. This is the closest one I have found. do you know if it would fit or where I might find the part. I have looked at several places and can not find it anywhere. thanks
Reply
Hi. Unfortunately, I was not able to locate any info on Aquasphere Pools. If you can send us photos of the following info we can try to identify your pool and maybe replacement parts. The Size of the pool & approximate age of the pool?* Image of the pool wall.* Image of the upright* Image of the top rail connection to the upright.* Name & age of the pool (if known).
Reply
I am looking for something similar to this, but 6 inches across the top of rail and 6 inches wide. Do you have anything like that? It needs to be at least 1 inch down to attach at the upright also. The ones we have are two pieces. Very old pool.
Reply
Thank you for contacting INYO Pools. Unfortunately, the above ground pool parts are not universal. Before we are able to recommend replacement parts, we'll need to identify the pool. Can you please send us the following images by emailing upload@inyopools.com or clicking here!Outside Pool Wall (Top to Bottom)Top CapTop RailUpright
Reply
I am searching for replacement top cap for a Patriot above ground pool (Silverado model) that is at least 13 years old. Do you have anything that would be compatible?
Reply
Hello Susan - The Patriot pool was made by Delair. Unfortunately, we do not have top caps that will work. We recommend trying www.teddybearpools.com. They carry Delair parts.
Reply
I need to know if this cap will work for pool rail that is 5 1/4 inches across top, inside down leg is 1 1/4 inch and outside down leg of rail is 2 1/4 inch. Thanks
It looks like you have the Vogue Podium model. The correct top cap is GR101-22100ABC. That cap is no longer available and Vogue does not offer a replacement. They advised us that 1030033F00 would not work.
Reply
Less than 1 hr
Screwdriver
0 1
After removing the old parts and straightening my pool wall and replacing the 52" upright, pool wall stabilizer, two top upright caps, I was able to replace my cover caps with these ledge covers. The holes lined up perfectly and the whole process took less than an hour with the help of these exact match parts.
1 to 2 hrs
Screwdriver, Dremel tool
1 1
The top caps looked the closest to what we were trying to replace on our 20 year old Haugh pool. (A Namco COOL pool) While undertaking a replacement of the liner, it seems each piece we removed needed to be replaced. Top caps were the hardest thing to find and we found the Inyo inventory the most expansive to choose from. With some minor alterations using a dremel cut off tool, the fit was just right. Our experience has been positive with INYO and I would highly recommend this company!
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Gooo service
Was this review helpful to you?
0 1
(5 out of 5 stars) Great for hard to find parts
Reviewed By: Inyo Customer ()
This is the exact replacement part. Top quality and very hard to find anywhere. It was received in a very short period of time also.
Was this review helpful to you?
0 1
(4 out of 5 stars) Did the trick
Reviewed By: William V. ()
good replacement fit
Was this review helpful to you?