$98.47
By Wilbar
Part # NBP2130-PACK4
18' Bottom Rail 56" (4-PACK) For The Atlantis
How to Measure the Length of a Bottom Rail
1) Use a flexible measuring tape. We found that a tailoring tape worked best.
2) Measure from one end, along the outside bend, to the opposite end.
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
I am looking to purchase 9 bottom rails that are 56 3/4. Will the ones on your site part #1460050 universally fit a oval pool with that size bottom rail?
Reply
Hi, We'd be glad to assist you. For matching above-ground pool parts we will need any or all of the following information. Do you know the make and model of your pool? Pool Size? We will also need a few photos, please supply a close-up photo of your top cap, top rail, and a wide shot showing the pattern of your pool wall. Also if you can pull any part #'s from the top cap, normally this is stamped into the underside of the top cap so you may need to remove the top cap. If you have any documentation from the pool like the owner's manual then if you could send us the page showing the parts diagram then that is always helpful as well. To supply this information and photos simply click the reply link below to upload your photos and your reply. Thank you very much and we look forward to working with you!
Reply
