Looking for part numbers on the bearings, so I make sure to replace with correct ones
Century Centurion B2852, F56AA36A01, Thank you
Reply
will this replace a PacFab CFll-N1-3/4A
Reply
Yes, this is the correct replacement motor for the motor included in your photo. You will also need a Pentair Challenger Seal Kit when you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
I have an AO Smith Century Centurion motor #7-193984-25 and FloPro FHPM .75 pump (see attached photos). It runs for about 25 seconds then stops. The sound is louder than normal, but not high-pitched or screeching. After a few minutes, the cycle repeats. After some time, the motor is hot to the touch. Do I need a new motor, a new pump, both, or something else? Thanks...
Hi Gary, I would suggest a motor and seal kit for your issue. This motor on this page is the correct replacement motor for the motor included in your photo. You will also need a Jandy Flo Pro Seal Kit when you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
is this the correct pump motor for a jandy flo pro housing #fhpm.75
Reply
Hello Ed. The Century 3/4 HP Up Rate Motor model B2852 is a compatible replacement for the Jandy Flo Pro FHPM 0.75. It is recommended that the motor shaft seal and backplate O-ring be replaced at the same time. Attached please find a link to those items. Pump Seal, Extra Heavy Duty PS4280 (Saltwater Pools) - PS-4280 Backplate O-ring - R0480300
Reply
Will this replace starite MPEA6D-204L?
Hello James. The Century Motors .75 HP Up Rate Motor model B2852 is a compatible replacement motor for the Sta-Rite Pool Pump model MPEA6D-204L. B2852 It is recommended that the motor shaft seal, seal plate gasket, and diffuser o-ring be replaced concurrent with the new motor. The GOKIT47 contains the necessary part to complete this project. GOKIT47
Reply
I need to replace my Pentair Super Flow motor SF-N1-3/4A/340037. What motor would you suggest and installation kit for the pump which is a 350097.G?
Reply
Hello Keith. The Century 3/4 HP Square Flange 56Y Up Rate Motor - B2852 is a compatible replacement motor for the Pentair SuperFlo model SF-N1-3/4A 340037. The Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78 contains the seals and gaskets required for the new motor installation. Attached please find the Pentair SuperFlo Pump exploded parts diagram for reference.
Reply
Do I need to purchase a inner seal/mechanical seal kit for pump shaft? If so, which one?
Reply
Hi Lou, we do recommend replacing the seals in your pump when replacing the motor to ensure a leak-free installation. The seals are based off of the pump and not the motor, so check out our guide on Which Pool Pump Seal Kit Do I Need? so you are sure to get the correct one. If you are unsure, send us a few pictures of your pump and motor to us at upload@inyopools.com and we will help identify what you need.
Reply
