?     Asked on 9/12/2016by john Kaufelt

is part #52201000 pump union sold in pairs for the price listed or only 1? one picture shows 2 unions.
 Reply

A  Answered on 9/12/2016 by InyoPools Product Specialist Scott W.

That would be for a single union.
 Reply


?     Asked on 9/12/2016by john Kaufelt

i asked a question about pump union #52201000 . i needed to know if the price listed was for 2 unions or just 1. got a message that you had answered my question but when i went to see the answer there was none.
 Reply

A  Answered on 9/14/2016 by InyoPools Product Specialist Stacey M.

Hello John, it is only for one.
 Reply


?     Asked on 2/11/2017by Bob Mulcahy

I have a VMC JS4200D pump and need new PVC plumbing unions What are the correct unions for this unit?
 Reply

A  Answered on 2/14/2017 by InyoPools Product Specialist Lennox H.

Hi, Bob. I was not able to find any info on the pump that you have so unable to confirm if this union will fit.
 Reply


?     Asked on 7/25/2017by bill

looking for 1 1/2 inch female/slip union
 Reply

A  Answered on 7/26/2017 by InyoPools Product Specialist Lennox H.

Hi, Bill. This union does have a 1-1/2" slip tail end and female buttress thread. 
 Reply


?     Asked on 2/19/2018by Kyung Yoo

I own an old Baker II Filer Model HRV-24 ser no. B20217. There are two 1/2" unions on the side for flows. The cap of one of the unions got cracked. Does this union cap would fit to this model?
 Reply

A  Answered on 2/20/2018 by InyoPools Product Specialist Lennox H.

Hi, Kyung. This union will not fit the Baker Hydro HRV-24 unit. The correct union is p/n 31B0077
 Reply


?     Asked on 3/29/2018by Mark Hill

valve is a Pentair 261186 for Sta-Rite CristalFlo High-\Rate Pool Spa Sand Filter. I have plumed the previous valve direct and had no unions on it which means I will have to cut the piping in order to rearrange to piping to match the new valve as it has a different location for the pump and filter than the older model. Current piping I have is 1 -1/2 inch PVC. I am considering using Pump Union, 1-1/2" FBT x 1-1/2" S - 52201000 for repairs. Will these match the diameter of my current PVC piping
 Reply

A  Answered on 3/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Mark. You will need complete union instead of half union. I would recommend that you use the Union, 1 1/2" Slip X Mpt - 400-4030 with the valve 261186.
 Reply


?     Asked on 6/9/2018by Chris

I have an aquacomfort pool heat pump model 100, the union cap is cracked, will this fit?
 Reply

A  Answered on 6/10/2018 by InyoPools Product Specialist Lennox H.

Hi, Chris. Unfortunately, I'm unable to confirm if these Pump Unions are compatible with the Aquacomfort Pool Heat Pump. You will need to reach out to an Aquacomfort parts dealer. 
 Reply


?     Asked on 8/1/2018by Gary Smith

Will this fitting work on a Premier made by Goulds Guard pool pump? The picture looks just like it. It has a bout 8 threads per inch (course) and is about 2.25" across the top of the threads.
 Reply

A  Answered on 8/1/2018 by InyoPools Product Specialist Lennox H.

Hi, Gary. This Pump union is 2-7/16" OD with Female Buttress Thread. I'm unable to use the info you've provided I'm unable to confirm if these union will work. 
 Reply