I purchased a used pool and need to replace some of the parts. Will these parts fit any pool?
Reply
Before placing an order you will need to know the manufacturer and model of your pool. Pool parts are not universal and are not guaranteed to fit any model other than the one listed.
Reply
Will these fit a Namco above ground 21fit pool... not sure of the model #
Thank you.
Reply
I looked a a bunch of different Namco models online but didn' get a good look at any of the connectors or rails. If you could send a couple photos of the top connectors you have with dimensions that would be a big help. Include photos of the rails as well. You mighht find part numbers for the top connectors underneath them. The style of Namco pool might also help. You can email me direct at bob.deakin@inyopools.comThank you and best of luck.
Reply
Will this fit a Doughboy Adobe pool?
Reply
Hello Paul, we don't carry doughboy parts, I would check with manufacturer http://www.doughboypools.com/best-above-ground-pools-manufacturer/pools/ to see if there are direct replacements for that type pool.
Reply
Does this match a T3530 top cap? I have looked and looked and they are all sold out and have been for the past 2 years. Ours are falling apart. I really don't know what else to do. I hate to spend a ton of money and them not work but I really don't know what else to do? Can you help me please. My cap says T3530 that's all I know about it I don't even know what kind of pool it is.
Reply
Does this fit a Cornelius above ground pool 16' X 32' pool oval shape pool.? I would need the anchor bottom part and the top connector. What are the dimensions of the top connector?It has the # 6774 on the bottom of the rail connector and a dial that is on a J
Reply
Hi Martha I'm sorry this does not fit a Cornelius pool and we don't sell Cornelius parts.
Reply
My cap on has esprit on it the size and description seem right do you carry this brand my pool is 5 years old and 24 round
Reply
Hi, Bobbie. This Top Cap will fit the Esprit Pool which we do have replacement parts for.
Reply
Top Connector Gray (SINGLE) For Atlantis, Esprit GLX - 1490837
Will these above connectors fit my 21' Round 52" Deep Pretium Above Ground Pool ?
Reply
Yes, the Top Connector Gray (SINGLE) For Atlantis, Esprit GLX - 1490837 is correct to the upper. If you need the Lower, please order the Lower Connector (SINGLE) For Atlantis, Esprit GLX 1450872 - 1490849
Reply
i need parts #2495 and #2496 can ya help me out
Reply
Hi. We're unable to help you, you can purchase those parts at https://www.asahiparts.com/.
Reply
I have a picture for the top connector I need for my up ground oval pool how can I upload for you to let me know the correct top connector I need
Reply
I have a 24'x52 Meadow above ground pool model ZESPCLXMEA 2452-001 and need top rail covers,are the ones you sell compatible ?
Reply
Thank you for contacting INYO Pools. Unfortunately, the above ground pool parts are not universal. Before we are able to recommend replacement parts, we'll need to identify the pool.Can you please send us the following images?Outside Pool Wall (Top to Bottom)Top CapTop RailUpright
Reply
I have a leisure bay 24ft round above ground pool. I am looking for the top caps to replace.
Reply
Hi, Jessica. We need to identify which model Leisure Bay pool you have. You can use our Identify My Above Ground Pool guide or email us the following pictures; Pool Wall, Upright, Top Rail and Top Cap.
Reply
Will this top connector work with a Cantar Classic Estate above ground pool?
Thanks
Reply
Hello Mike - The Esprit top caps do not work on the Estate models. The Estate model uses part number 1490855.
Reply
We have a 12 X 24 Doughboy and need replacement caps, the caps have cup holders, do you have something that will work?
Photos attached.
Thank You
Unfortunately, we do not carry Doughboy pool parts. There a few companies that I came across on a google search that do specifically mention that they have Doughboy pool parts.
Reply
Hi,
I've been trying to locate this coping clip. If you have something comparable I could use it. Please let me know. I have included a picture. The length of mine is not quite 6" and width at narrowest point in 4" and with 5". If possible I would like to buy one and see if it fits and then order more if it's compatible.
Reply
Hi, Julia. The picture was not uploaded. Please try to resend it so that we can assist you.
Reply
I have a pool from Muskin Leisure Products, approximately 10-15 years old. I am missing 3 ledge covers. The manual that I have for it says the replacement is part number 7011781H. Would this item fit? Is there a better option to replace them?
Thanks!
Reply
Hi. Unfortunately, we do not have anything that can be used to replace P/N 7011781H.
Reply
I HAVE A ARTESIAN POOL 7100 SERIES RIVERVIEW ULTRA 52. I NEED THE TOP CAPS THAT COVER WHERE THE TOP RAILS MEET.PART #31620
Reply
Hello, we do not have the #31620 but we do have its alternate part from the manufacturer #35298
Reply
We have recently gotten an pool and the previous owner doesn't know the name of the pool. I am in search of top caps like this.
Hi Kelli,You might want to click this link here Above Ground Pool Top Caps. This page shows the most popular top caps. You can then also click the All Top Caps Image in the bottom right corner of this page to see every top cap we sell. Once you click into a top cap you think might be yours then click on the icon on the upper left corner of the product details page which says "Size" and compare the size to your top cap. I hope this helps!
Reply
Hello,
We have an Interline pool Century 8.5 x 4.9m and we have to replace the 18 (let’s round up to 20) plastic corners as on the photos hereby.
Can you give us a price and a delivery time ?
Big thank you,
Philippe
Hi Philippe, your pool was manufactured by Doughboy pools and, unfortunately, we do not carry parts for that brand. We recommend contacting https://part-express.doughboypools.com/ or https://lomart.com/contact-us/ for new top caps for your pool.
Reply