Will this replace Hayward VS 1.5 hp super model SP2600vsp? This 240v version.
Reply
Hello Ken. The Hayward Super Pump VS Motor Upgrade Kit, 1.65 HP, MKIT3VS16 is compatible with the Hayward Super Pump VS model SP2600VSP.
Reply
Hi there, Would this upgrade kit work on a Hayward Model#: C48K27143B1 - 1 HP in ground pool pump/motor? Use case: 25,000G in ground pool. Many Thanks!
Reply
Hello Donald. Unfortunately, part number C48K27143B1 ( possibly C48K2N143B1 ? 1.0 HP Up Rate Motor ) does not cross-reference to a Hayward Pool Pump or Motor. The Hayward Super Pump VS Motor Upgrade Kit MKIT3VS16 is compatible with the Hayward Super Pump 1.0 HP models. The Kit contains all the parts necessary to complete the upgrade. Attached please find a Hayward Super Pump exploded parts diagram for additional reference. Hayward Super Pump
Reply
will this work with SP2670020VSP
Reply
Hello Leslie. The Hayward Super Pump VS Motor Upgrade Kit MKIT3VS16 is a compatible replacement motor/drive assembly for the Hayward Super Pump VS model SP2670020VSP.
Reply
Is this the correct upgrade kit for a Hayward SP2605X7 pump with a AO Smith C48J2N131B1 3/4hp With 56j code?
Hello Kevin. The Hayward Super Pump VS Motor Upgrade Kit 1.65HP MKIT3VS16 is compatible with the Hayward Super Pump SP2605x7. This kit will transition the SP2605X7 from a 0.75 HP Single Speed Pump to a 1.65 HP Variable Speed Pump. Hayward Super Pump VS Motor Upgrade Kit - 1.65HP - MKIT3VS16
Reply
Is this the correct upgrade kit for a Hayward SP2605X7 pump with a AO Smith C48J2N131B1 3/4hp With 56j code?
Thank you for contacting Inyo Pools, Yes this kit will work for your pump. I sent a quote to your E-mail
Reply
Is this compatible to upgrade from Hayward Tristar sp3207z1be, HP 3/4 RPM 3450, or what do you recommend?
Hello Tim. The MKIT3VS16 is not compatible with the Hayward TriStar Pool Pump. To upgrade to a variable speed motor/drive, the V-Green 1.65 HP Square Flange 48Y Variable Speed Motor - ECM16SQU and Tune Up Kit Hayward TriStar/EcoStar - GOKIT81 would be required. The current impeller can be utilized with the ECM16SQU as it is rated for 1.4 horsepower. Attached please find the Hayward TriStar SP3200X Series Pump exploded parts diagram for reference.
Reply
I see the voltage rating on these motors is 208-230 VAC. Incoming residential voltage around here is typically 240 VAC. Mine measures 247 VAC on a Hayward Super pump while it is running. Will 247 VAC be too high for the motor or the controller in the MKIT3VS16?
Reply
Hello James. The operating characteristics defined in NEMA Standard MG-1 are coded onto the motor nameplate indicating the operating voltage required for optimal performance as intended by the manufacturer. Electric motors are typically designed with a 10% tolerance for voltage above and below the rated nameplate value. A motor with a rated nameplate voltage of 230V can work within the range of 207V to 253V. When a motor is rated at 208/230 volts this means the motor will operate at the 208V rating, not 10% under the 208V rating.
Reply
I tried to order this upgrade motor for my super pump, but V-Green VS Motor instead, so I cancelled the order. I want the Hayward because I like that it has an internal clock and day by day timer for the programming, which the V-Green doesn't. Also I know that the Hayward will fit in my layout. Do you actually sell the Hayward motor, and if so, how do I buy it?
Reply
Hello Mark. The Power End Assembly for SP2603VSP - SPX2603Z1VSPE is the compatible Power End Assembly (230V) for the Hayward Super Pump models Super Pump VS Omni, Super Pump VS SP26700 Series, and Super Pump VS SP2600 Series. The Power End Assembly SPX2603Z1VSPE is in stock and can be ordered through the INYO Pools Website.
Reply
Is this kit compatible with pump SP2670007X10?
Hello Charles. The Hayward Super Pump VS Motor Upgrade Kit - 1.65HP - MKIT3VS16 Is compatible with the Hayward Pump model SP2670007X10. Attached please find the Hayward Super Pump VS 700 - SP2670010X15, SP2670007X10 exploded parts diagram for additional reference.
Reply
I have a Hayward SP2610X152S pump. Will this 1.65HP VS motor be compatible? (pipes are all 2 inch)
My present motor is wired into a 240V mechanical Intermatic timer. The power feed to this new motor would need to bypass the timer, correct?
Reply
Hello Glenn. The Hayward Super Pump VS Motor Upgrade Kit - 1.65HP - MKIT3VS16 is compatible with the Hayward Super Pump model SP2610X152S.
Reply
Will this motor replace SPX2710Z1M on pump SP2310X15?
Thank you!
Reply
Hello Alex. The Hayward Super Pump MKIT3VS16 is NOT compatible with the pump SP2310X15 - Hayward MaxFlo XL. The V-Green 1.65 HP Variable Speed Motor - ECM16SQU is a compatible motor replacement for the SPX2710Z1M motor on the SP2310X15 MaxFlo XL pump. The Pump Shaft Seal Seal Plate o-ring Diffuser o-ring should be replaced concurrent with the new motor. Attached please find the Hayward MaxFlo XL SP2300X Series exploded parts diagram for reference.
Reply
Is this pump a replacement for a 1.5 HP Superpump that powers my spa (and is too strong most of the time)? Can it be automated with my Jandy iAqualink controls to change speeds (so the normal filtration/SWG operation can be slow but the heating fast)?
Reply
Hello Perry. The Hayward Super Pump - MKIT3VS16 is a compatible variable speed motor replacement for the Hayward Super Pump. The Kit features the Century V-Green Motor model ECM16CU. Attached please find the VARIABLE SPEED USER MANUAL The V-Green Automation Adapter Kit provides the automation capability for the ECM16CU. Automation Adapter Kit Installation Manual and User’s Guide Please note pages 14-18, Wiring/Operating the Adapter. The Adapter is limited in its ability to adjust motor speeds. For a broader range of flexibility, a Jandy VS Pump would be recommended.
Reply
I currently have a Hayward super pump.
Model number c48k2n143b, it died last night I need to get a replacement. I was wondering about all my options thinking about a variable speed motor with the replacement kit. Could you give me both options, a direct replacement with kit and the variable speed with kit. Thank you very much
Hello Robert. The Century 1.0 HP Round Flange 56J Up Rate Motor - UST1102 is a compatible single-speed motor replacement option for the Hayward Super Pump with motor model C48K2N143B1. The GOKIT3 contains the necessary seals and gaskets to complete the new motor installation. The Hayward Super Pump VS Motor Upgrade Kit - 1.65HP - MKIT3VS16 is a compatible variable speed motor replacement complete with seals, gaskets (all GOKIT3 pieces), and a 1.5THP impeller. The slightly larger impeller will provide more advantageous water flow (GPM) at various motor speeds (RPM)
Reply
I have a Hayward SP2600VSP (1.5HP). Appears that the ceramic seal died, and caused the motor bearing to fail? Is this an appropriate replacement for my motor assembly? Thanks!
Reply
Hello William, yes this assembly/kit is compatible to replace the original motor and seals for your Hayward Super Pump model SP2600VSP.
Reply
I have a Waterway SMF 115 pump thats has gone bad. Pretty sure that the bearings have gone bad.
What motor is a direct replacement for a Century Pool Pump Motor #
C48AB46A79, 1.65 HP.
Is there a variable speed motor that could be used as a replacement? Thank you very much for your time and assistance.
Hello Perry. The Century 1.5 HP Square Flange 48Y Up Rate Motor - USQ1152 is a compatible replacement single-speed motor for the Waterway SMF-115, motor model C48AB46A79. The V-Green 1.65 HP Square Flange 48Y Variable Speed Motor - ECM16SQU is a compatible variable speed motor for the Waterway SMF-115, motor model C48AB46A79. It is recommended that the Face Plate Gasket - 711-1400, Pump Shaft Seal 5/8" - PS-1000, and the Diffuser O-ring - 805-0238 be replaced concurrent with the new motor.
Reply
I have a hayward super pump SP1615Z2MSC I need to replace can you help by letting me know if this will work?
Hello Mark, the direct replacement for your Hayward Super Pump motor is the B2977. The MKIT3VS16 is a variable speed option that we currently do not have in stock while you have a dual speed. Also the standard chlorine pool seal kit for your pump is the GOKIT3 and the saltwater version is the GOKIT3SALT.
Reply
Hello! My Hayward C48L2N134B1 1.5 hp killed itself last night. I have an SP2610S15 housing. Will this be a good VS setup for me?
Hi Matthew, the Hayward Super Pump VS Motor Upgrade Kit - 1.65HP will be a perfect upgrade for your 1 1/2 HP Single Speed Hayward Super Pump. It has everything you will need to make your pool pump energy efficient.
Reply
I have a Hayward SP2607x10 pump and want to replace motor with a variable speed motor. What motor would fit?
Reply
Hello Joe. The Hayward Super Pump VS Motor Upgrade Kit - 1.65HP - MKIT3VS16 contains a Century VGreen EVO 1.65 HP variable-speed motor, 1.5 THP Impeller, the seals and gaskets necessary for the variable speed motor installation. Attached please find the Hayward Super Pump exploded parts diagram for reference.
Reply
what are my options for upgrading to vs motor?
attached pictures
Hello Nick, the variable speed motor option for your motor model c48k2n143b1 is the ECM16CU. It is also recommended to replace the seals and gaskets when replacing a pool pump motor. For your Hayward Super Pump the seal kit for a standard chlorine swimming pool is the GOKIT3 and for a saltwater pool it is the GOKIT3SALT.
Reply
Hi, I need to replace the motor for my Hayward pool pump. The model # is SP2670010X15. I believe it is a 1.5 hp pump. I’d like to upgrade to a variable speed motor. Is this the correct kit to purchase? Thank you!
Yes, you can use the MKIT3VS16 to replace the motor on your Hayward SP2670010X15 pump.
Reply
