?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
 Reply

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
 Reply


?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
 Reply


?     Asked on 5/21/2018by Don

I have a Sta-Rite 1 hp pump. Model number PRA6E 147L Code EOOZ. I want a tune up kit for this pump. What one do I need to order.
 Reply

A  Answered on 5/21/2018 by InyoPools Product Specialist Lennox H.

Hi, Don. The Sta-Rite Dura-Glas Tune Up Kit - GOKIT6 (Pre-1998 with Seal Insert) or GOKIT54 (models without Seal Insert). 
 Reply


?     Asked on 7/29/2018by L

We have a Flotec Pump Model# AT251501-01. Our pool maintenance guy said we need to replace the Impellar & Diffuser Housing parts. Can you please let me know which parts those are so I can purchase thru here? Thanks, L Texas
 Reply

A  Answered on 7/31/2018 by InyoPools Product Specialist Kevin G.

Hello, the impeller is part number 5057-08A and the diffuser is part number 5057-09A.
 Reply


?     Asked on 8/5/2019by Patrick O'Neill

Pump: AT251001-01 Is this the right kit and is it okay to use in saltwater pools? Thanks.
 Reply

A  Answered on 8/6/2019 by InyoPools Product Specialist Joe S.

Hi Patrick, yes based on AT251001-01 the GOKIT44 would be the correct unit. However, for the seal we would recommend adding the Shaft Seal PS-201V, 3/4" Shaft Size (PS-201V-CMS) PART # 35-423-1096.
 Reply


?     Asked on 4/27/2020by Rick

Is this the correct kit for a Sta-Rite Dyna Glass MPRA6F-148L?
 Reply

A  Answered on 4/27/2020 by InyoPools Product Specialist Patrick P.

Hi Rick yes this is the correct seal kit for the Sta-Rite Dyna Glas.
 Reply


?     Asked on 5/6/2020by Inyo Visitor

My pump is making a loud noise and has loss suction in skimmer and filter, will replacing these pieces help?
 Reply

A  Answered on 5/7/2020 by InyoPools Product Specialist Alex V.

Hello, If your pump is making noise, the motor bearing may have failed. If that's the case, replacing the seals will not fix the issue. Please review our Why Is My Pool Pump So Loud? blog. 
 Reply


?     Asked on 8/15/2020by Jack

Is this the correct kit for A.O Smith SQ1202?
 Reply

A  Answered on 10/29/2020 by InyoPools Product Specialist Hector F.

Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 11/11/2020by Chris

Hi, I have a sta rite model DJAFC-3103D that is leaking. Is this the correct kit for that pump? If not, do you have a kit for that pump? Thanks.
 Reply

A  Answered on 11/13/2020 by InyoPools Product Specialist Hector F.

Hi Chris, this Sta-Rite Dura Jet pump series does not actually have a seal kit per se however key numbers 4 and 5 on this parts diagram would be the most commonly replaced seals when tuning up this pump. 
 Reply


?     Asked on 6/10/2021by JOHN GARFIELD

I HAVE A FLOTEC 1 1/2 HP POOL PUMP - MODEL #AT251501-01 - MOTOR #C48K2PA105... WILL YOUR "STA-RITE TUNE-UP KIT" - DO THE TRICK AND FIT ON THIS SPECIFIC MODEL?

 Reply

A  Answered on 6/11/2021 by InyoPools Product Specialist Danny R.

Hey John.Yes this GOKIT44 will work for your Flotec AT251501.
 Reply