Is this kit for salt water pools?
Reply
This model pump does not have a separate Tune-up Kit for salt water pools. You would need to purchase the gaskets and o-rings individually and include the Pump Seal 200, Heavy Duty PS3867 (Saltwater Pools) - PS-3867.
Reply
Where is bearing
Reply
The bearings for the motor and the tune up kit that has the orings and gaskets are two different things. If you need help finding the correct bearings for you please provide the part number off your motor.
Reply
Hi, can you confirm this is the proper tune up kit for a pentair superflo N2-1-1/2A/340043? thanks.
Reply
Hi, Kevin. The Pentair SuperFlo Tune Up Kit - GOKIT78 is the correct kit for model #340043.
Reply
Is this kit for a SF-N1-1A/340038? Does it include bearings? Thanks in advance.
Reply
Yes this is the correct seal kit for your Pentair Super Flo Pump SF-N1-1A 340038. Bearings are not included, if you do need bearings then your motor requires 2 of this 203 Pool Motor Bearing.
Reply
Ticket # 264298 My impeller screws directly onto shaft. There is no brass threaded piece protruding from the bottom. Therefore the shaft seal spring part is not snug on shaft and seal part is too wide to fit in bottom of impeller.
Reply
Hi, Andrew. Please reconfirm the pump model or upload a picture of the pump body so that we can confirm which kit you'll need for your pump. The partial pump model number provided will use the Tune Up Kit Sta-Rite Max-E-Pro (Pre February 2015) - GOKIT79 not this Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78.
Reply
Just ordered a replacement pump for my Pentair 355022S 1hp Superflow from you Order # 926893 :Pentair Replacement Motor 1 HP Full Rate Single Speed Almo 075234S Kit Pentair SuperFlo/Sta-Rite SuperMax GOKIT78
My questions: 1. is this Tune Up Kit correct for my pump? 2. Do you have the front and rear bearings for this Pentair Pump as I want to replace the bearings? 3. Is the shaft seal in the kit the same as the heavy duty shaft seal (Pump Shaft Seal Heavy Duty (Saltwater Pools) - PS-3867)?
Reply
Hi, Richard. This is the correct tune up kit for your model pump. As for the bearings, we do not have the correct bearings because it's an OEM motor. The shaft seal in the kit is just a standard seal, not heavy duty.
Reply
THE SEAL BETWEEN THE MOTOR AND IMPELLER HOUSING IS LEAKING. WHEN I PULL IT APART TO REPLACE THE O-RING , WILL I NEED OTHER SEALS THAT MAY GET DAMAGE DURING THIS REPAIR. THIS WAY I WILL HAVE TO ORDER THE KIT INSTEAD OF JUST THE ORING THAT I WILL NEED.????
Reply
Hi Kelly, We would suggest the kit as many times when you take the pump apart old o-rings that were not previously leaking start to leak when you try to re-install them.
Reply
What are all the parts in the kit. I need to get the parts for use with a saltwater pool. You have already provided the part number for the saltwater heavy duty seal but what are the remaining parts I need to purchase separately?
Reply
Hi Kyle, After going through all of the parts it would be less expensive to purchase 1 GOKIT78 and 1 Heavy Duty Shaft Seal This would give you an extra standard shaft seal but it is always good to have a backup shaft seal on hand. The standard seal can be used on a salt pool however the heavy duty seal will last much longer on a salt pool.
Reply
I have pump SF-N1-1-1/2A/340039 running waterfall on salt pool. Is this correct kit. I am replacing motor with PL2854 as mine is getting hot and thermally shutting down in about 20 minutes
Reply
Hi Ray, This GOKIT78 is the proper seal kit for your SF-N1-1-1/2A 340039 and the PL2854 1.5 Replacement Motor is also correct. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
Could you please list the parts that are depicted in the photo for your tune up kit
This is what I think I need:
Item No. Part No. Description
6 355619 SEALPLATE GASKET x
9 355030 DIFFUSER SEAL x
12 192115 0-RING, DRAIN PLUG x
14 357255 0-RING, LID #2-357 x
23 3545455 SEAL SET x
27 6020018 0-RING ADAPTER #2-226, 2 REQ. x (2)
It will include the one seal plate o-ring, one diffuser o-ring, one shaft seal, two drain plug o-rings, two of the union nut o-rings, and o-ring lubricant.
Reply
THE GOKIT78 INCLUDES THE FOLLOWING PARTS Kit Contents: (2) APCO2395 - F07 LETRO O-RING (1) APCO2300 - 355619 PACFAB O-RING (2) APCO2455 - O-RING 92200100 355330 (1) APCO2223 - 355030 PACFAB O-RING (1) APCAS200 - PUMP SEAL - 354545 PACFAB
Reply
1-As 200 pump seal, 1-O-130 drain plug o rig, 1-0-150 pimp lid o ring, 1-0-395 Diffuser o ring,1-0-465 seal plate o ring, lube for o rings
Reply
The Go-Kit78 includes the Seal, 2 drain plug orings, 1 Lid oring, 1 Diffuser oring and 1 Seal Plate oring
Reply
I have a Pentair Super Flo (1hp) and need to put on a new motor as the current one has started making a loud whining noise. I believe the new motor should be A.O. Smith 1 HP Square Flange 56Y Up Rate Motor - B2853. If that is correct, Which "tune-up kit" do I need to order with it?
As a separate issue can I mount a 1.5 hp motor (and would it be wise) on the current pump housing and if so would it provide more suction at my skimmer and drain? If so, which motor and tune up kit would be best?
Reply
Hi, KP. This tune up kit is the correct one for your pump. If you want to increase the pump HP to 1.5 you will need the matching motor, impeller and this kit.
Reply
How hard is it to do the gasket and seal replacement for a 340037. Should I have someone else do it
Reply
Most of our customer tackle this job on there own as it is not too difficult. Here is a Guide on How to Install a Seal Kit which might find helpful.
Reply
can i get this kit with the saltwater seal
Reply
Hi Ken, unfortunately, we do not carry this seal kit in a saltwater version however you can get the saltwater shaft seal seperately.
Reply
Can i get a tune up kit with the saltwater seal
Reply
my pentair superflo pump will not prime up, it ran dry for a period of several hrs. The pump is only 1 yr. old, does it need to be rebuilt because it ran dry and got hot?
Reply
Hi Randy, there could be multiple reasons why a pool pump will not prime. Here is a guide that we put together called "How To Determine Why a Pool Pump Won't Prime" that should help.
Reply
I need a kit for a Pentair SuperFlo 350097 in a salt water pool.
Reply
i need a quick kit for a whisperflow 2hp model wfe-8
Reply
Hi Francis, the seal kit for your Pentair Whisperflo series pool pump in a chlorine swimming pool is the GOKIT32 and for a saltwater swimming pool it is the GOKIT32SALT.
Reply
Motor company is loud.
What can I or do I need to do to silence it ?
Reply
The loud sound is likely caused by bad bearings. You can try replacing the motor bearings but it is not the easiest task. We'd recommend replacing the motor. The seal kit, GOKIT78, would not help with the noise but it would help protect new bearings/motor.
Reply
Pump is start to make noise SF-N1-1A/340038 looking for correct tune up kit.
Hi Richard, if you are confident on the cause of why your pump is loud the Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78 will be perfect for your Pentair SuperFlo Pump. Be sure to check out our article on How To Replace a Pool Motor Shaft Seal if you have never done it before for some helpful tips.
Reply
Hi, I wolud like to knof if this fits in this Pump?
Pentair Superflo High performance punp
P/N 340039
PMP SF N1 1 1/2A HP 115
Horsepowers 1.5
Reply
Thank you for contacting Inyo Pools, Yes this Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78 will fit your pump model.
Reply
Hi i have a SF-N2-2A/340044. I need a bearing and seal kit. Please point me at the correct ones
Hello Will. The Century Motors Bearing 203, quantity 2 (two), is the correct bearing for the Pentair Motor 177456. Bearing, 203 (Single) The GOKIT32 contains the motor shaft seal, seal plate gasket, and diffuser o-ring necessary to complete this project. GOKIT32
Reply
Do these parts fit this pump?
Hello Annabel. The Aladdin Tune Up Kit Pentair SuperFlo, GOKIT 78, is compatible with the Pentair Pump Model 340040 - SuperFlo. Attached please find an exploded parts diagram for the Pentair SuperFlo Pool Pump for reference. Pentair SuperFlo Pump Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78
Reply
Hi, I have a Sta-Rite SuperMax VS model 343001. Will this kit (GOKIT78) work ? Thanks.
Reply
What the the individual p/n's of the parts in kit called GOKIT78? I am installing and new motor and want to make sure all of the necessary o-rings are included. The pump previously had a small weeping leak at pump housing close to motor and need to confirm this O-ring is part of the kit? If not, I will order separately.
Reply
Hello Robert. The following parts are included in the Aladdin GOKIT78 Tune Up Kit for the Pentair SuperFlo/Sat-Rite SuperMax Pumps: Motor Shaft Seal (354545), Drain Plug o-ring (192115), Pump Lid o-ring (357255), Diffuser o-ring (355030), Seal Plate o-ring (355619), Magic Lube II. Part numbers indicated are Pentair MFG OEM and do not reflect Aladdin's identification. Attached please find an exploded parts diagram for the Pentair SuperFlo Pump for reference. Pentair SuperFlo Pump
Reply
I have a Waterway Mustang 56 frame pump. I am planning on replacing the motor with a B2854. Are these the correct seals?
Reply
Hello Joe. Attached please find the Waterway SVL56 High-Flow Pump exploded parts diagram for reference. The Diffuser O-ring, Pump Shaft Seal 5/8" - PS-1000, and Gasket, Housing are the seals and gaskets necessary to complete the motor replacement.
Reply
I have a Pentair SuperFlo 340037 and a Pentair Motor 196237 .5 HP. Can you recommend motor and KIT for replacement? Thanks.
Hello Mike. The Century 1/2 HP Square Flange 56Y Full Rate Motor - B2846 is a compatible motor replacement for the Pentair Motor 196237. The Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax - GOKIT78 contains the parts necessary to complete the motor replacement.
Reply