i need to know how deep this clamp is. My old one is an inch from side to side. I tried a Haywood brand but it was too narrow and wouldn't fit. I could not find any dimensions on this part. My filter has no visible brand name or model on it..
Reply
Hi Pat here are the dimensions for this clamp: Diameter: 9-9/16”, Height: 13/16”, Width: 1/2”
Reply
Will this clamp work on Intex 16 inch sand filter? Model number is SF60110-1
Reply
Reliant sand filter model # BC2715
Need flange clamp measures 6 1/4 inch diameter
Reply
Hi, We are showing that the part # of BC2715 is for the pump, could you supply us with the filter model #? You can simply reply to this email with that information.
Reply
Hi, does the
Flange Clamp for 16" & 19" Pooline Filter - 647304072
fit the Blue wave Sandman filter that is 18" or 22"? Models NE6150 / NE6170
It was listed under the 18 or 22 heading for that make
I'm a bit desperate because mine has cracked and the pump hasn't been run for several days, since it now leaks.
Reply
Can I order the 2 screws used in the flange clamp for 16" & 19" pooline filter only? That's all I need is the screws. Any help is appreciated!
Reply
Hello, Unfortunately, we only sell this as a whole unit.
Reply
Will this clamp fit a Bestway #58496E sand filter pump? I believe the Bestway part number is P61974
Reply
Hello, Unfortunately we do not carry Bestway parts. We recommend trying http://www.bestwaycorp.us/
Reply
I have a Blue Torrent 18” sand filter, will this work for this? We have already purchased 2 online that haven’t fit. We are wasting money paying shipping on parts that don’t fit, thank you
Reply
Hi. This Clamp - 647304072 will fit the 18" BlueTorrent Mega Clean Series filter.
Reply
I purchased thinking it would fit intex pump that used 11380 but it does not. My filter pump is 14”. Any suggestions?
Reply
Hi, Yale. Unfortunately, we do not sell any parts for Intex equipment. I will request a Return Merchandise Authorization (RMA) for you.
Reply
I have a Pro 2450 GPH 13" Sand Filter Above Ground Swimming Pool Pump. will this fit?
Reply
HI, Kim. The Filter Clamp Assembly - PL1577 is the correct replacement for the Pro 2450 GPH 13" Sand Filter.
Reply
Thank you so much! I have been looking all over for this clamp. I just ordered it!
Reply
I have a Sand Pro 75D filter.
Will this clamp fit or is it too big?
Thanks!
Reply
Hi Joe, unfortunately, this clamp is not compatible with the Game Sandpro model 75D sand filter. That clamp is no longer manufactured with no listed replacement. You can also double-check directly with Game at 1.888.339.2546 for any possible replacements.
Reply
I need a flange clamp for and sand filter EE3050 (part #647304072). the diameter of the top hole is 8".
What does the 16", 19", and 21" measure? The diameter of the center part of the sand filter??
If this is what I need, how soon do you anticipate getting one in? My filter is leaking from the crack in one side of my current flange.
Thank you for you quick response on this!!
Debbie
Reply
Hi Debbie, the 16", 19", and 24" refer to the diameter of the filters that this clamp was made for. Click on the "Notify me when in stock" button on the product webpage and we will email you when they are back in stock.
Reply
