What is the difference between the Fiberstars 2004 and 6004 illuminators?
Reply
The 2004 model has a strand capacity of 400 while the 6004 will hold 450 fiber optic strands. The 6004 has a metal halide lamp that is rated at an average of 6000 hours. The quartz-halogen lamp inside the 2004 is rated at 400-700 hours average. The 6004 model is more energy efficient than the 2004 and consumes less power.
Reply
Will the Fiberstars 6004 or 6004AS light up 2 lights and perimeter lighting?
Reply
The number of lights the 6604 and 6004AS will illuminate will depend on the number of fiber strands. The 6604 and 6004AS will accept up to 450 strands of fiber.
Reply
Hi can you advise if this unit is a direct replacement of my 15 year old fibre stars control box which is controlled by a Jandy Aqualink control box
Reply
This is the new version of the FiberStars illuminator. This new illuminator will work with any fiber optic cable and the Aqualink system. It will hold 450 strands of fiber.
Reply
I am looking to replace my illuminator with the 2004 or 6004. I have 2 locations so I would need 2. My question is can I get both of them on 1 remote to turn on and off, and change colors. thank you
Reply
Hi Scott - If these are two separate pools then you would need two separate remotes. If you use the AutoSynch units on one pool then you could go with one remote to control both units as the two illuminators would be wired together.
Reply
I am currently using a NEXXUS metal halide illuminator 6 color self sync 550 strand max. Color wheel is not rotating....what do you sell that will replace the existing system?
Reply
Hi, The Super Vision 6-Color Illuminator (SV150T6) or Fiberstars 4 Color Illuminator (6004) can be used as a replacement to your existing unit.
Reply
Where can i find only the replacement cover for the Fiberstars 4 Color Illuminator 2004 that got damaged? The motor works fine.
Reply
Hello Belinda- Here is a link to the cover for your Fiberstars 4 Color Illuminator 2004, its Top Cover (a11604) part number 3595-44.
Reply
