How does the remote connect to the existing unit?
Reply
This item comes with a remote and a receiver. The receiver is mounted at the illuminator. The remote control sends a signal to the receiver to turn power on and off to the illuminator as well as start and stop the color wheel.
Reply
What is the difference between the Fiberstars 2004 and 6004 illuminators?
Reply
The 2004 model has a strand capacity of 400 while the 6004 will hold 450 fiber optic strands. The 6004 has a metal halide lamp that is rated at an average of 6000 hours. The quartz-halogen lamp inside the 2004 is rated at 400-700 hours average. The 6004 model is more energy efficient than the 2004 and consumes less power.
Reply
Will the Fiberstars 6004 or 6004AS light up 2 lights and perimeter lighting?
Reply
The number of lights the 6604 and 6004AS will illuminate will depend on the number of fiber strands. The 6604 and 6004AS will accept up to 450 strands of fiber.
Reply
I currently have a WPC3 remote that is not working, I understand I need to upgrade to an RM6000 system? On my WPC 3 I have 4 button's
one for on/off, one for spa light, one for Pool Light, one for Sync both lights, will this RM6000 system and remote work all those items?
Reply
I have a working RM-6000 receiver with the RM-400 ckt board inside, my remote transmitter for this unit is bad. Can you tell me Mhz range for the transmitter so I can repair it and or the cost to replace it.
Thanks
Reply
Hi, Bill. The range is 75 feet depending on obstructions conditions. Replacement parts are not available.
Reply
I have this unit . the remote stopped working . (Not battery ) is this what normally fails . Making sure before I order this
Reply
Hi, Wayne. The receiver or transmitter can fail. However, this kit will replace both.
Reply
