I have an FS4 Series illuminator with an old HI-110 19.7 volt 183 watt light bulb. What replacement bulb do I use?
Reply
The proper replacement bulb for the FS4 Series Illuminator is the HI-111 24 volt 250 watt bulb. FIberstars has discontinued the HI-110 and replaced it with the HI-111.
Reply
I have a fiberstar light with a 19.7 volt 200 watt bulb. What is the correct replacement bulb?
Reply
The proper replacement bulb is the HI-111 24 volt 250 watt bulb. We have spoken with Fiberstars several times regarding this bulb and they confirmed the HI-111 24 volt 250 watt bulb is the direct replacement for the older style 19.7 volt 200 watt bulb which they have discontinued.
Reply
I have an FS3 CR lighting system, I went to change out the bulb,(HI-110) but the base that it is inserted into broke, is there a replacement for this?
Reply
Hi Linda, The B9155 Socket would be the correct replacement socket for the Fiberstars FS3CR illuminator.
Reply
We have replaced the halogen bulb but the lighting in the pool is still very dim. Is there any other part that we should replace or check in the lighting system itself. (or a special part we should be looking at) thank you
Reply
Hi Tom, Sometimes the ends of the fiber-going into the fiber head of the illuminator need to be re-cut over time and this can give you brighter lighting. Here is a Good Video On Cutting Fiber which may be helpful for you.
Reply
Hi, could you please let me know what the replacement bulb for the hi 100 is please, thank you
Hello - does your illuminator look something like this: Fiberstars Illuminators, 6004, 6008, 6004-AS
Reply