?     Asked on 1/18/2012by Guest

Is it possible to purchase just the insert part of this as a replacement?
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

There is no replacement part for that and you would need to replace the whole unit.
 Reply


?     Asked on 3/2/2015by PRJ

This check valve comes with either 1/2 lb or 2 lb springs. When would I need a 2 lb spring?
 Reply

A  Answered on 3/3/2015 by InyoPools Product Specialist Robert M.

Most systems will only require a 1/2 lb spring. The 2 lb spring is required for situations with greater head or backflow pressure. An example would be solar panels mounted on an 8' high roof.
 Reply


?     Asked on 9/30/2016by Don

Can the 1700C15 check valve be supplied with Viton seat material. EPDM doesn't have very good compatibility with chlorine and doesn't provide satisfactory service life.
 Reply

A  Answered on 10/4/2016 by InyoPools Product Specialist Lennox H.

Hi, Don. Unfortunately, the 1700C15 is not available with Vition seals.
 Reply


?     Asked on 3/8/2019by Inyo Visitor

installed this valve on the suction side of my new pump. Now my pump won't prime. I think the suction from the pump won't pull the spring valve open?
 Reply

A  Answered on 3/13/2019 by InyoPools Product Specialist Lennox H.

Hi. This check valve has a 1/2 lb spring, your pump should be sufficient to open the mechanism. I would check to see if the valve was installed correctly. The arrow pointing towards the pump inlet.
 Reply


?     Asked on 5/3/2021by SAMUEL MALAVE

is this valve spring loaded or is it a flapper type?
 Reply

A  Answered on 5/3/2021 by InyoPools Product Specialist Patrick P.

This is a spring-loaded check valve.
 Reply


?     Asked on 5/3/2021by SAMUEL MALAVE

I need 2" pvc spring loaded compression type check for my Jandy 1.5 HP pump. I have 7260 gL I ground pool with spa and heater. If you have this check valve please let me know.Thank you.
 Reply

A  Answered on 5/4/2021 by InyoPools Product Specialist Patrick P.

Hi Samuel, The valve on this page meets the specifications you described and this valve is currently in stock. You can purchase this valve directly from the top of this page.
 Reply