1. Home
  2. Pool Parts
  3. Salt Pool Systems
  4. Hayward / Goldline AquaRite
  5. PKIT
  6. Q & As

?     Asked on 4/23/2015by DJH

I only need the unions - I have the t cell / flow switch. Any idea where I can find the unions only? Thank you
 Reply

A  Answered on 4/24/2015 by InyoPools Product Specialist Robert M.

Hello DJH - The union is part number 2807-22.
 Reply


?     Asked on 6/14/2015by Inyo Visitor

No flow staying lit continuously.
 Reply

A  Answered on 6/14/2015 by InyoPools Product Specialist Patrick P.

Nine times out of ten this is a bad Aquarite flow switch. You may check to see if the cable to the flow switch has been nicked or chewed by an animal.
 Reply


?     Asked on 6/17/2017by Rodney Lawless

Hi, Could you tell what part of the system tells what the salt level is?
 Reply

A  Answered on 6/18/2017 by InyoPools Product Specialist Lennox H.

Hi, Rodney. The Cell relays the salinity and temperature reading back to the controller.
 Reply


?     Asked on 5/5/2018by randy

just uncovered the pool turned on pump salt water pool no flow light is on.i am not generating I want to know if no flow light stays on until I generate.
 Reply

A  Answered on 5/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Randy. The No Flow light will stay on until water flow engages the flow switch. As long as the system thinks water is not flowing, you will not generate any chlorine. If you're sure that the system is getting at least 15 GPM, you may want to check the connection at the controller or your flow switch may be bad.
 Reply


?     Asked on 6/1/2019by Kelly

Is control panel for HO and RJ the same
 Reply

A  Answered on 6/1/2019 by InyoPools Product Specialist Lennox H.

Hi, Kelly. The AquaTrol HP and RJ use different Control Panels.
 Reply


?     Asked on 6/25/2019by Elizabeth Layden

How do you attach the unions to the tflo piece. They dont fit in
 Reply

A  Answered on 10/2/2019 by InyoPools Product Specialist Michelle B.

Hello, You would glue this part in the PVC.
 Reply


?     Asked on 6/25/2021by Inyo Visitor

Do you have to have a flow switch , can it be bypassed and still generate salt?
 Reply

A  Answered on 6/26/2021 by InyoPools Product Specialist Patrick P.

Yes we do carry the flow switch for the Hayward Aqua Rite which you may view or purchase here - Flow Switch for Hayward AquaRite. No can the flow switch cannot be bypassed and still generate salt.
 Reply