?     Asked on 8/7/2009by Guest

What is the ColorLogic Network Module designed for?
 Reply

A  Answered on 8/7/2009 by InyoPools Product Specialist Patrick P.

The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here http://www.inyopools.com/lights_colorlogic.aspx. The ProLogic Systems & ColorLogic Modules can be seen here http://www.inyopools.com/sanitizers_pro_logic.aspx.
 Reply


?     Asked on 8/30/2009by Guest

Do i just need the light and my current prologic controller which runs my pool filter and spa etc.. or do i have to have a separate controller for the colorlogic led pool light?
 Reply

A  Answered on 8/30/2009 by InyoPools Product Specialist Patrick P.

You can use just the ProLogic to control the ColorLogic light but you will only be using a fraction of the overall control capabilities. To get the complete control capabilities you would need to order the ColorLogic Gen. 4.0 light here http://www.inyopools.com/lights_colorlogic.aspx along with the ColorLogic Communication Module here http://www.inyopools.com/Products/02200000040136.htmWhen using the ColorLogic Communication Module with the ProLogic the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement.
 Reply


?     Asked on 5/1/2013by Guest

Will this module work with the Hayward Pro Logic PL-P-4?
 Reply

A  Answered on 5/1/2013 by InyoPools Product Specialist Patrick P.

No, the module will only work with the PS series Pro Logic. If you have the PL-P-4, the module won't work.
 Reply


?     Asked on 6/18/2015by Thomas

I have a PL-P-4 system with color logic LED generation 4.20 lights is there any way to dim them? They are way way too bright. Thanks
 Reply

A  Answered on 6/18/2015 by InyoPools Product Specialist Joe S.

The ColorLogic Network Module is used with the Pro Logic to fully control the color, speed, motion and brightness of pre-set light shows in a compatible Hayward ColorLogic pool/spa light(s). After installing the ColorLogic Network Module and enabling the function in the Pro Logic, the user can program various parameters to fully customize their pool/spa light(s) operation.
 Reply


?     Asked on 4/5/2016by Vinnie

Do I have to purchase the color logic control module for the light to work or will it work without it ?
 Reply

A  Answered on 4/5/2016 by InyoPools Product Specialist Charlie R.

Vinnie,The light will work without purchasing the Color Logic LED Communication module. The module is used to fully control the speed, motion, and brightness of the light. The light will still turn on and off and cycle through shows without the communication module.
 Reply


?     Asked on 6/18/2016by George

Will the module work with a PL-Plus 20G ? Thanks
 Reply

A  Answered on 6/20/2016 by InyoPools Product Specialist Scott W.

That should work together but I'd recommend giving Hayward a call to confirm that it will. There number is 908-355-7995.
 Reply


?     Asked on 8/1/2017by paul

if I set one 4.0 light to 2.5 setting will they sync?
 Reply

A  Answered on 8/5/2017 by InyoPools Product Specialist Alex V.

Paul, The 4.0 and the 2.5 ColorLogic lights have different software. They will not sync. 
 Reply


?     Asked on 8/10/2017by Eric

Is it possible to connect colorlogic to my Aqua Rite Pro module?
 Reply

A  Answered on 9/28/2017 by InyoPools Product Specialist Lennox H.

Hi, Eric. This Colorlogic module is not compatible with the Aqua Rite Pro controller. 
 Reply


?     Asked on 6/27/2018by Gary

Have a color logic 4.0 120v What do I need just to control my light . Pick colors instead of switching up down up down on my switch
 Reply

A  Answered on 6/27/2018 by InyoPools Product Specialist Kevin G.

Hello, unfortunately, since your light is 120V, there is no standalone controller available.  
 Reply


?     Asked on 7/5/2018by Sagar

Can I connect this to an OmniLogic controller? I thought the ProLogic was the old controller and the OmniLogic one was the newer one, but I don't see anything listed for compatibility.
 Reply

A  Answered on 7/7/2018 by InyoPools Product Specialist Lennox H.

Hi, Sagar. This is only compatible with the ProLogic Controller. The OmniLogic is the newer of the Hayward line of Automation control system.
 Reply