Is it possible to replace the light housing while using the existing electric cable?
Reply
You cannot use your existing light cable. You will need to pull the new cord through the conduit on the new light.
Reply
How do you synchronize two or more Color Logic lights?
Reply
The Color Logics lights will synchronize when they are wired to the same switch. To synchronize the circuit boards inside the lights, you need to turn the switch off for at least 10 and no more than 14 seconds. When you turn the switch back on, the lights should be on the same color rotation.
Reply
What is the ColorLogic Network Module designed for?
Reply
The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here http://www.inyopools.com/lights_colorlogic.aspx. The ProLogic Systems & ColorLogic Modules can be seen here http://www.inyopools.com/sanitizers_pro_logic.aspx.
Reply
I had a Hayward SP0525SLED50 that has gone Bad. I am looking to match up a replacement lamp that is compatible. I have a salt water in ground pool.
Reply
Hi Tom, unfortunately, we do not carry a replacement for the Hayward light model SP0525SLED50 however if you can provide us with the light niche model we may carry another light that is compatible with your current niche.
Reply
I currently have ColorLogic 2.0 lights #SP025SLED50 that I need to replace. They are no longer available. What lights have replaced this old model?
Reply
Hi Abby, you may be able to use a J & J Colorsplash pool light as a replacement however you will need to confirm your niche model. It should be marked on the niche itself. Please see this technical datasheet to see the compatible niches.
Reply
