What is the voltage on this unit? How long is the manufactures warranty? If the system requires repairs during warranty, what do I do?
Reply
This pump runs on 115V power. This unit comes with a 1 year manufacturer's warranty. If the pump needed repair, you would call Hayward directly and they would put you in touch with a warranty service station in your area.
Reply
what size hoses does this take and does it comes with hoses, clamps? does it include everything to just hook up to the pool?
also, is this a 21" sand filter and how much sand does it take??
Reply
Yes this comes with all the hoses and clamps needed to just hook up, the hoses are 1.5". This is a 21" sand filter which requires 250 Lbs. of sand.
Reply
When should I change the sand in my filter?
Reply
You should change the sand in your filter every 5-7 years. You can generally tell that it is time if your pool water is not as clear as it normally is or when you notice the interval between backwashes is shorter. You can use > this guide to walk you through it.
Reply
how many gallons per minute is the flow?
Reply
Hello Mary, This is depending on feet of head, meaning the feet of pipe measuring from your pump to drain/skimmer. These are broken into certain lengths of feet: 20ft is 91GPM 30ft is 80GPM 40ft is 62GPM 50ft is 32GPM.
Reply
What are the detailers of the timer?
Reply
Hi, Timer. The detail of the timer can be found in the Hayward Controls Microprocessor Manual.
Reply
where is the timer
Reply
Hi Phyllis, the timer is a Hayward Controls Microprocessor.
Reply
