I have a pool that is about 10,000 gallons but I am thinking of buying a salt chlorine system for pools up to 20,000 gallons. Would the larger unit be a problem?
Reply
It is not a problem to oversize a salt system. It would take the larger unit less time to produce the necessary chlorine so it is actually more efficient. When the pool volume is very close to the capacity of the salt chlorine generator (for example, the pool is 18,000 gallons and the generator is rated at a maximum of 20,000 gallons), we would recommend going up to the next size generator.
Reply
Is the salt included with the salt chlorine generator?
Reply
No, salt is not included. You would purchase the salt locally and the quantity will depend upon the number of gallons of water in your pool. Use a salt that is at least 99.8% pure NaCl. The preferred salt is evaporated, granulated, food quality, and NON-iodized. Avoid using salt with anti-caking agents like sodium ferrocyanide, also known as yellow YPS (prussiate of soda). These cause some discoloration of fittings and pool surface finishes. DO NOT use calcium chloride.
Reply
Hi There I have a few questions I would like to see if you can answer on this system.
1. Will I need the Hayward Electrical Installation Kit ITEM # E-KIT or is it included?
2. What is the difference between the Hayward pH Dispense, 120V, Acid Feed ITEM # AQL-CHEM3-120 & the pH Dispense, 120V, Solenoid Valve for CO2 ITEM # AQL-CHEM?
3. Is there anything else I need to order to install this kit?
4. How large is the Aqua Rite Pro unit? How large is the Sense & Dispense unit?
Reply
Hi There,Yes the E-Kit is included. The AQL-CHEM3-12 is an acid tank and pump and would dispense muriatic acid to the pool to lower the pH in the pool. The AQL-CHEM hooks up to a CO2 Canister you would purchase locally and would use CO2 to lower the pH in the pool. So one system uses acid to lower the pH and the other would use CO2 The AQRPRO15KSD would be everything you need if you want to maintain the pH through CO2, if you would like to maintain your pH through acid then you would purchase the following items individually: AQRPRO - Aquarite Pro Power Supply, TCELL3 - Salt Cell, AQLCHEM, AQLCHEM3-120
Reply
Will the water taste salty?
Reply
Generally you should not be able to taste any salt in the pool because the level of salt in the water is so low, however some people with sensitive palates might detect a small amount of salt.
Reply
Will the Aqua Rite work on a portable spa?
Reply
The Aqua Rite chlorinator is specifically designed for use with in-ground pools, and will not work with portable spas or hot tubs due to its high output.
Reply
What is “SUPER CHLORINATE”?
Reply
The unit will run in 2 separate polarities and continually switch sides as long as the pump continues to run. The desired output percentage dial will tell the chlorinator how long to generate in each polarity, SUPER CHLORINATE simply tells the unit to ignore the dial setting for 24 hours and generate chlorine at 100% of its capability.
Reply
Why do I have to add murriatic acid to the pool?
Reply
Murriatic acid helps to control the pH in the pool. If the pH rises too high, adding in murriatic acid will lower pH level to a more tolerable level. Alkalinity helps to keep pH from fluctuating wildly but you will still experience fluctuations regardless.
Reply
Is the flow switch direction important?
Reply
Yes. The flow switch must be mounted so the arrows on the switch it’s self go in the direction of flow. Also, the flow switch requires 12 inches of straight pipe before the water enters the part to ensure there is no turbulence inside the switch compartment causing the switch to display “no flow” in error. Also, the switch needs to see at least 11GPM of flow to properly close the switch.
Reply
I'm a little confused; if I get this system do I need anything additional to balance the ph?
Reply
Hi Greg, This system would do all the balancing of your pH through the CO2 dispenser. You would need to purchase the CO2 canisters locally as the actual CO2 does not come with the system.
Reply
We have a solar pool pump. On sunrise and dawn the power of the flow is very little. Is Aqua Rite Pro able to handle this without a flow error, and will it start to work properly as soon the full flow is given?
Second; I would need it with 220V -Power suppy. - Avaliable?
Thank you!
Reply
Hi Guido, The Flow Switch requires at least 11 GPM to be activated. You can wire this unit for wither 115 or 230 volts
Reply
I have a 2000 gallon swim spa. I would like to install the AquaRite Pro Power Center with Sense and Dispense with the T-Cell-3. Will there be any problems with this smaller pool using this system?
Reply
Hi, Guest. Yes, you're able to install such a system to operate your swim spa.
Reply
