What is the ColorLogic Network Module designed for?
Reply
The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here http://www.inyopools.com/lights_colorlogic.aspx. The ProLogic Systems & ColorLogic Modules can be seen here http://www.inyopools.com/sanitizers_pro_logic.aspx.
Reply
Do i just need the light and my current prologic controller which runs my pool filter and spa etc.. or do i have to have a separate controller for the colorlogic led pool light?
Reply
You can use just the ProLogic to control the ColorLogic light but you will only be using a fraction of the overall control capabilities. To get the complete control capabilities you would need to order the ColorLogic Gen. 4.0 light here http://www.inyopools.com/lights_colorlogic.aspx along with the ColorLogic Communication Module here http://www.inyopools.com/Products/02200000040136.htmWhen using the ColorLogic Communication Module with the ProLogic the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement.
Reply
For a color-changing LED light, how do I switch between the different settings with just a standard light switch?
Reply
The LED lights are designed to move to the next programmed setting each time you turn the switch on and off. This will toggle through the different color settings and shows.
Reply
This light has very bad reviews on line.I need a relacement bulb/What will fit that you reccomend. Do i have to but the silver plate as I already have it from exsisting Hayword colored led ??
What is the Warranty ??
Reply
Hi Susan, The ColorLogic Lights does not have a replacement bulb, you will have to replace the entire unit.
Reply
Have to replace Hayward sp0525sled100 in deep end , 8 years old . It just keeps flashing . Is this the larger light size ? Read they don't make that light anymore , have to replace with sp0527led100 . Is that right ? And discription will not tell me the size round ? Help thanks
Reply
Hi, Tom. That is correct, this the current replacement to the SP0525SLED100. If you need the 100 foot unit the model number is SP0527SLED100.
Reply
My Hayward #SP0525SLED100, just recently went out on me. Do they over a PCB replacement, or do I need to purchase the whole unit?
Also have it, and my waterfall feature attached to an X10 Pro, which I would like to get rid of, do you have any suggestions on a new remote system to control both of them?
Thanks,
David
Reply
Hi David, Unfortunately you would need to replace the complete light fixture. I personally like the PureLine PureColors Light Fixture as it will fit in your Hayward Niche and if the bulb ever goes bad then you can just replace the bulb and you don't need to replace the complete light fixture. I'm not aware of a simple remote control for any of these lights outside of the X10 remote.
Reply
