Need to replace the motor connected to a Hayward SP2607X10. Is there a seal included with this motor?
Reply
If you are replacing the original motor that came with the pump then you would be using the model UST1102 and the standard seal kit is the GOKIT3. The salt water version is the GOKIT3SALT.
Reply
What is the service factor %
Reply
Hello, the service factor on this motor is 1.1 making the motor total horsepower 1.1 as well. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
which pump seal kit goes with this motor?
Reply
I need to replace my Hayward Super Pump SP-1607-Z1-M. Is this the right one?
Thanks
Hello Narciso. The Hayward Pool Products 1 HP Max Rate Motor model SPX1607Z1M is a compatible replacement motor for the Hayward Motor model SP-1607-Z1-M. The Century Motors 1.0 HP Up Rate Motor model UST1102 is also a compatible motor replacement for the Hayward Motor model SP-1607-Z1-M but at substantial savings. Century 1.0 HP Round Flange 56J Up Rate Motor - UST1102
Reply
I have a 1hp , hayward super pump, model# is C48K2N143B1 volts 115/230, HZ60, I see your number is different?
Hello Dominick, the correct single speed replacement motor for your motor model C48K2N143B1 is the UST1102 or you can use our Pureline model PL1103. We also recommend replacing the seals and gaskets when replacing a pump motor to prevent leaking and ensure the motor warranty. For your Hayward Super Pump(assuming that is the original motor) it will be the GOKIT3 for a chlorine swimming pool and the GOKIT3SALT for a saltwater pool.
Reply
would this pump work as a replacemaent of a hayward 1 HP super pump?
Reply
Hello, yes this motor is compatible as a replacement for your original 1 HP Hayward Super Pump. You can also use the UST1102 or the PL1102. We also recommend replacing the seals and gaskets when replacing a pool pump motor. The correct seal kit for a saltwater pool on a Hayward Super Pump is the GOKIT3SALT and for a standard chlorine pool will be the GOKIT3.
Reply
