I have your basic pool light. 10-11" light. i need to replace the whole light and cord. Is this the size to fit it?
Reply
Hi Gary, This light will not fit into a light niche that can hold a fixture that is 10-11 inches. If you can provide us the model no. of the niche that you have we can recommend a replacement. If you're looking to use this light in your pool you can reference the Jandy Nicheless LED Owner's Manual for installation instructions and requirements.
Reply
I have a no niche inground pool light installed around 1994.I would like to replace it with this light. Approx. One inch in diameter hole exists in my metal pool wall.What would it take to retrofit this system
..
Reply
Hi John, Please reference the Jandy Nicheless LED Owner's Manual for installation requirements. As long as your pool meet those requirements this light can be installed in your pool.
Reply
Does this light come with a 100 ft cord?
Reply
Hi. The new Jandy Pro Series - JLU4C9W100 is available.
Reply
Hello. I have a Jandy JLUC 10-50 nichless LED light that just went out in my fiberglass pool. Will the JLU4C9W50 fit into the same fixture?
Thank you
Reply
Hi, Mark. Yes, it will. However, the JLU4C9W50 requires a minimum of 3 inches of 1-1/2" pipe. Please refer to the Jandy WaterColors Pro Series Nicheless Manual for installation requirements.
Reply
I have a new Jandy JLUC10-100 LED light. My pool has an older 500W Amerilight. Do you sell a retrofit kit so I can install
this LED light in the old hosing?
Reply
Hi Jesse, unfortunately, we do not carry a retrofit kit for this Jandy Watercolors pool light. We do carry the Aqualumin nichless pool light series however are not LED. For the Amerlite series, you can use a Colorsplash LED bulb Be sure to replace the Amerlite gasket as well.
Reply