Need to drain water off pool do to excessive rain do you make a hose to fit drain valve?
Reply
These filters have a 1.5 inch drain port that you can thread a water spigot to then attach any standard water hose to for draining. You can get these spigots from any local hardware store.
Reply
If the center core lifts out when removing the cartridge, is there a particular way it must be reinstalled?
Reply
Hi, Ray Hardy. The Center Core can only be installed one way. You will have to line up the groves with the grove in the tank body.
Reply
How to drain water from pool through the filter?
Reply
You can install a 1.5-inch spigot on the drain port then attach a water hose so you can drain in when the pump is on. Or you can add a 3-way valve in the plumbing before the filter and attach a backwash hose to that.
Reply
How does the clean&clear 100 compare agaisnt the rp version. I'm replacing my Hayward 90 on a 10k pool with an pentair vs pump. I know either will fit just want to know the difference.
Reply
Hi, Derek. The RP models maximize flow efficiency and ease of installation.
Reply
hi, would this work ok with a pump that does 320 lpm thankyou.
Reply
I have a Hayward sand filter that has crack - 2nd one - so I'm done with that. I'm looking to upgrade to a cartridge filter. I have an old pool - 23k gallons. 1hp single-speed pump with 1.5 inch pipe, so I'm limited to 44gpm flow. Would this filter be large enough as a minimum size filter? Thanks for the help.
Reply
If the pump is pushing 44GPM at 50' of head, yes, the Clean & Clear RP Cartridge Filter 100 sqft. - 160354 will be a great choice for the pump and gallon size of the pool. You are welcome to provide the pump wet-end model number and we will review it.
Reply
