Is there a suitable LED Bulb replacement for the Pentair SpaBrite 120V?
Reply
Yes. The J&J Electroincs Color Splash Spa LED bulbs will work with this light. The part number for the 120V bulb is LPL70301102A.
Reply
Is this the best replacement for an old American Products 100W, 120V underwater, wet niche spa light? The dimensions seem correct and 60W would probably be adequate. I'm, not seeing a 100W, 120 V replacement. The old part number looks like M532026. I'm not sure about the last 3 digits. Thanks for your help.
Reply
Hi Dave - Yes this would be the direct replacement for your older American Products 100W, 120V spa light. The 100W version was replaced by the 60W version a few years back.
Reply
can I use an LED bulb in this light. what specific LED's will fit?
Reply
Hi Bob, If you have a SpaBrite light then you could use one of the Color Splash LED Spa Bulbs here.
Reply
What is the replacement lens gasket number for the 7810600 60W 120V light ?
Reply
is there a white LED bulb that will fit this fixture. I'm not interested in color changing. 100w equivalent (or any other wattage) thanks
Reply
At this time there is not a solid white led that will into a spa housing only the color changing LED's.
Reply
what is the base type that comes with the light fixture? what are my light replacement options?
Thanks
Reply
Hi, Emad. This Pentair SpaBrite light has an R20 base. Here are the available bulbs that is compatible with this light fixture, the 60W 120V Floodlamp - 79108000, LED Spa Bulb Color Changing 120V 5W - PL5817, Color Splash LED 2G Spa Lamp, 120V - LPL70301102 and or Color Splash LED 3G Spa Lamp, 120V - LPL70301102A
Reply
I'm trying to replace a 30 yr old Sunlite pool lamp that has a faceplate measuring 5.5 inches across. It has an arm on the bottom to grab the tab in the niche and a single screw on the opposite side. Will this work as a replacement? Also the tab on the niche that should have a nut to receive the screw doesn't have the nut there, it's just a hole in the tab. Previous owner plastered the lamp in. Any suggested fix?
Reply
Hi, Brian. This SpaBrite fixture will work as a replacement. If the mounting ring does not have threads on it, you will need to purchase a CMP Inground Spa Light Adapter - 25549-540-000.
Reply
Thanks for the reply. I looked at the adaptor you linked and someone replied that the inside diameter of the adaptor is 5.5". My niche is 4 3/4" across inside diameter. Will that adaptor be too big, and knowing that will the lamp still fit?
Reply
Hi there,
I have an american product spa light fixture 100 Watts, 120 volts, R20 and 30 ' cord with incandescent light bulb. I can not find the same one. The model number is probably 78104100. is the model 7810600 a replacement for it with incandescent light bulb? what other light bulbs would be compatible with this model. thanks
Reply
Yes, it replaced with the Pentair Pool Products Pentair SpaBrite 60W, 120V, 30' Cord - 78106000.
Reply
I have an american products lite, that I believe to be a spa lite in my pool. The series is 7810XX the watts are 100 the volts 120 and the bulb is R-20. My questions are will this lite be a good replacement for the lite I have, and is there a LED bulb that I can get to work in it? It also says on the lite to use with model 7824XX & 792066 fixture housing wet niche type Fresh water only.
