1. Home
  2. All Categories
  3. 011008
  4. Q & As

?     Asked on 1/30/2015by Sharon

What size pool filter would you recommend for this size pool pump? Pool is 15X30X8 at the deepest end.. Thanks for any assistance you may give.
 Reply

A  Answered on 1/30/2015 by InyoPools Product Specialist Robert M.

Hello Sharon - A full rated 1HP pump, like the 011008, would be sufficient for your pool size. The Clean and Clear 100 would be the proper size filter for your pool.
 Reply


?     Asked on 2/2/2015by SHARON

I HAVE THIS PUMP ALREADY I NEED TO KNOW WHAT TYPE OF CARTRIDGE FILTER I NEED TO GO IN TO REPLACE MY OLD STAY RITE 075 FILTER THAT HAS PIN WHOLES IN THE STAINLESS TANK TOP. TRY FOR NEW ANSWER. THANKS SHARON ABEL
 Reply

A  Answered on 2/3/2015 by InyoPools Product Specialist Robert M.

Hello Sharon - We have a 75 square foot Pentair Clean & Clear cartridge filter that would work with the Pentair i1.
 Reply


?     Asked on 3/8/2015by Inyo Visitor

What is the voltage? How many wattage (KW) is it rated?
 Reply

A  Answered on 3/9/2015 by InyoPools Product Specialist Robert M.

The voltage for the Pentair Intelliflo i1 is 230. The max wattage is 1,679.
 Reply


?     Asked on 10/29/2016by TONY BONILLA

I GOT A PENTAIR 011008, AND THE POOL IS 10,000 GAL, I RUNNING THE PUMP ON # 3 FOR 6 HRS MY QUESTION IS IF THAT ANOFF TIME AND THE RIGTH SPEED
 Reply

A  Answered on 10/31/2016 by InyoPools Product Specialist Scott W.

What is the distance from your pump to the main drain of your pool and what is the RPM's at #3? I will need to know this so I can calculate the flow rate so I can determine if that is the correct speed.
 Reply


?     Asked on 10/31/2016by Tony Bonilla

10,000 gal. pool 40 fts from the main drain at speed #3 1500 rpm ia that the rigth speed ?
 Reply

A  Answered on 10/31/2016 by InyoPools Product Specialist Scott W.

You're looking at about 45 gallons per minute on that which is going to be about 4.5 hours to turn your pool over one time. That means if you are running it about 6-8 hours a day, you're getting some good circulation.
 Reply


?     Asked on 5/22/2017by Danny

Hi, would this pump be sufficient for a 19000 gallons pool with an average depth of 4.5' and deepest end at 6', and main drain from pump 10', also what size triton ll sand filter will be best for this pump. My intention for this pool is for comercial use. Thank u.
 Reply

A  Answered on 5/28/2017 by InyoPools Product Specialist Lennox H.

Hi, Danny. This pump will provide sufficient water flow for a pool that size. The Triton TR140 has a max flow rate of 106 GPM for commercial pool use.
 Reply


?     Asked on 6/6/2017by jim

Would this work on an above ground 24' pool? no main drain just in the has return on side of pool. trying to save energy currently have a 1 1/2 HP pump that is loud.
 Reply

A  Answered on 6/13/2017 by InyoPools Product Specialist Patrick P.

Yes this pump could be used on an above ground pool. You will need hard plumbing and not hoses and you will also need 230V power.
 Reply