?     Asked on 6/10/2016by Rich

I was wondering how to clean the pump?
 Reply

A  Answered on 6/11/2016 by InyoPools Product Specialist Alan M.

Hi, Cleaning out the pump is really easy. First you will need to remove the pump lid by grasping the handle and turning it counter-clockwise. Second you will need to remove the basket inside the pump body. It should just pull straight up. Empty the debris and replace the basket. Third, place the pump lid back on the pump body and twist the lid clockwise to lock it in place. Fourth, Enjoy the pool!!
 Reply


?     Asked on 4/15/2017by Inyo Visitor

I currently have a 1 hr pump. I have really low return, would it hurt to put a 1 1\2 hr pump in. The only way the auto pool cleaner will move is when I by pass filter & just let the water circulate.
 Reply

A  Answered on 4/16/2017 by InyoPools Product Specialist Scott W.

If you go with a 1.5HP motor then you will have to upgrade your impeller as well to fit the horsepower of your motor.
 Reply


?     Asked on 6/24/2017by Tim Rabalais

Is there a reset button on this pump? My pump has quit working and we had a storm last night and I thought maybe we had a power surge that shut it down. I have checked the breakers and plugs and they are all just fine. Thanks, Tim
 Reply

A  Answered on 7/3/2017 by InyoPools Product Specialist Lennox H.

Hi, Tim. There is not a reset button on the pump. It sounds like the pump motor has died and would need to be replaced. 
 Reply


?     Asked on 7/12/2017by Inyo Visitor

Where do I connect the bonding lug on the Pentair Sta-Rite 340197SR? Thank you for your help.
 Reply

A  Answered on 7/12/2017 by InyoPools Product Specialist Alex V.

Hello, The bonding lug is located on the body of the motor. If you have a bonding wire, you would connect it there. 
 Reply


?     Asked on 5/18/2019by Joe Botero

I need to replace my Sta-Rite pump model JWPA5E7L-2A1, which I see you have in stock. The picture I see on your website appears to have a top discharge, I need mine to have a side discharge. In fact the label on mine says Pool Pump Horiz Disch 1HP. Can you help me? My cel is 609-741-9767. Thank You
 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Michelle B.

Hello, You would be able to rotate this to make this a side discharge.
 Reply


?     Asked on 2/10/2020by Don Billman

I need to replace my Sta-Rite Dynamo pump Model No. 193261.....Is this essentially the same pump? I need to be assured hat I can hook it up in the same manner.
 Reply

A  Answered on 2/11/2020 by InyoPools Product Specialist Lennox H.

Hi, Don. This is the correct replacement. 
 Reply


?     Asked on 2/17/2020by Joaquin

I am looking to replace my Sta-Rite 340316SR with this 340197SR ...they seem to be somewhat similar from what I can tell. Do they move about the same amount of water? Thank you!
 Reply

A  Answered on 2/19/2020 by InyoPools Product Specialist Lennox H.

Hi, Joaquin. Yes, they will move the same amount of water. 
 Reply


?     Asked on 5/12/2021by Duane Morrissey

what can I use as a replacement?
 Reply

A  Answered on 5/12/2021 by InyoPools Product Specialist Robert M.

We recommend the Waterway model PH1100-6. If you are using a hose with unions that connect the pump to the filter, you'll likely have to change to the style of hose that clamps on to fittings like part number PL0020.
 Reply