Do the WFE-3 and WFE-24 have the same pump curve?
Reply
The WFE-24 and WFE-3 have the exact same pump curve. You may read more about full rate and up rate pumps here >http://www.inyopools.com/poolanswers_pumps.aspx#full_rated_up_rated_max_rated and you may view or purchase either of these pumps here >http://www.inyopools.com/pumps_pentair.aspx
Reply
I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
Reply
Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
Reply
how quiet is the whisper flow compared to super flow
Reply
We do not have the decibel rating for either to answer the question, you will need to contact Pentair at 1.800.831.7133. I will note, the Superflo and Whisperflo are two very different pumps, noise should not be the real determining factor of the two. The type of pump and flow provided is what you should seek, then factor in noise. In this example, the SuperFlo 1.5 HP Single Speed Pump - 340039 will provide approximately 70 gallons per minute (GPM) at 50' of head (industry standard for curves is 50') and the Whisperflo Pump 1 1/2 HP - WF-26 PART # 011773 offers approximately 85 GPM. We offer How to Size a Pool Pump for Your In-Ground Pool
Reply