?     Asked on 1/25/2012by Guest

How do I change the shaft seal on my pool pump?
 Reply

A  Answered on 1/25/2012 by InyoPools Product Specialist Patrick P.

Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
 Reply


?     Asked on 8/8/2016by frank fontenot

is this suitable for salt water pools?
 Reply

A  Answered on 8/16/2016 by InyoPools Product Specialist Lennox H.

Hi Frank, This shaft seal is compatible with saltwater pools.
 Reply


?     Asked on 4/17/2017by Haskell Davis

my pentair pool pump 1.0 HP SF-Ni - 1a1340038 I believe i need a shaft seal. What all do I need?
 Reply

A  Answered on 4/17/2017 by InyoPools Product Specialist Scott W.

I need your pump model to recommend the correct shaft seal for your pump.
 Reply


?     Asked on 6/4/2017by Inyo Visitor

i have a dynamo high performance 1.5 hp above ground pool pump, we are needing the pump shaft gaskets . Do you have those? not sure if this is the part # for our pump but is has p/n 340210, serial # 0306207130016L.
 Reply

A  Answered on 6/9/2017 by InyoPools Product Specialist Patrick P.

This would be the correct shaft seal for your Dynamo pump.
 Reply


?     Asked on 8/12/2019by jerry

how do you remove the impellor from a pentair challanger motor shaft to replace the shaft seal
 Reply

A  Answered on 8/13/2019 by InyoPools Product Specialist Jessica C.

Hi, Jerry. There is a video on How To Remove Stubborn Pool Pump Impellers as well as How To Replace a Pool Motor Shaft Seal for your replacement. 
 Reply


?     Asked on 8/27/2019by Inyo Visitor

What are the correct replacement bearings for pump motor AO Smith 2HP SQ1202? Thank you.
 Reply

A  Answered on 9/12/2019 by InyoPools Product Specialist Hector F.

The front bearing part number is 5270-32 and the rear end bearing is part number 5270-31
 Reply


?     Asked on 4/7/2020by Inyo Visitor

Should I also replace the seal bracket o-ring when replacing the seal?
 Reply

A  Answered on 4/7/2020 by InyoPools Product Specialist Hector F.

I believe that you are referring to the seal plate housing gasket and we would recommend also replacing that. You just need to confirm the pump model to cross-reference those parts. 
 Reply

  • Commented on 4/7/2020 by Product Owner

    I believe SuperFlo refers to it as the seal bracket in their parts list. Thanx
     Reply


?     Asked on 6/19/2020by Inyo Visitor

Will this fit a sand dollar/pentair dynii-n2-2?
 Reply

A  Answered on 11/20/2020 by InyoPools Product Specialist Hector F.

Hello, yes this shaft seal is compatible with the Pentair/ Pac Fab Dynamo pool pump. 
 Reply


?     Asked on 4/23/2021by Inyo Visitor

My pump has a slow leak underneath when on low rpm setting 2200. When I hit the quick clean button, 3450 rpm, the drip becomes much more frequent. Any recommendations? I purchased the shaft seal, impeller oring and seal diffuser oring.
 Reply

A  Answered on 4/23/2021 by InyoPools Product Specialist Robert M.

The shaft seal or volute/pump body o-ring should fix the leak. If not, there may be a small crack in the seal plate or pump housing.
 Reply