I have intellipro VS-3050 the motor seems to be stuck i have to switch on and off by breaker
Reply
I recommend giving Pentair a call, 800-831-7133, to see if there is something you can do to fix the problem, otherwise you will need a new one.
Reply
my pool guy says the driver has died(only been about 21/2 years and wants $900 to put back together-The pool company installed and has serviced my pool for the same 21/2 years-has been a great service until this happened-Can this be normal or were their warning signs?
Reply
Hi, Don. In most cases, they are not warning signs that the drive is failing. Some signs could be that the failed to start, blank display etc.
Reply
Unable to set time. go through procedure, but display will change rapidly, before resetting.
Reply
Check the drive wiring connection, it could be loose. Check the connection between the drive and keypad, the drive wiring connection should be tight. If that does not resolve, please contact Pentair directly at 1.800.831.7133 for technical assistance with the drive.
Reply
Hi, I have a Sta-rite VS pump. Not sure what the model number is maybe 354830. The screen is partially blank. I did the contact cleaner approach and that fixed it for a couple of months. Now It's gone partially blank and retried the contact cleaner to no avail. I need to replace the screen assembly. I believe that that part number is 353252. Can you please confirm.
Thanks
Hi Curtis, Thanks for the question! Yes this 353252 is the correct replacement drive and display for the Sta-rite IntelliPro VS pump - 354830.
Reply
