?     Asked on 5/11/2015by Robert Turner

I bought a uwf disconnect 9-100-9001, and included in the bag was a red and blue disc, or maybe orfice plate.. what is purpose of the red and blue discs? and where do they fit? There was no instructions included with the part.
 Reply

A  Answered on 5/11/2015 by InyoPools Product Specialist Lennox H.

Robert, The red and blue parts that comes with the UWF are restrictor disk. They can be used to limit the amount of water flow that's going to the cleaner. The restrictor disk snaps on behind the wall fitting.
 Reply


?     Asked on 6/25/2015by Inyo Visitor

portion of quick connect broke off at end of the connecting tube. Can't get it to release from the hose so i can insert tip of quick connect into the opening hole in quick connect? any suggestions
 Reply

A  Answered on 6/27/2015 by InyoPools Product Specialist Lennox H.

Hi, If the tip of the UWF Quick Disconnect (380/280/180) broke off into the hose, you can cut that piece off and replace the UWF Quick Disconnect (380/280/180).
 Reply


?     Asked on 7/19/2015by Frank

This part connects to a fitting that screws into the pool wall? Is that fitting included with the UWF quick disconnect? If not do you have that part? Thanks, Frank
 Reply

A  Answered on 7/19/2015 by InyoPools Product Specialist Hector F.

The part that you are referring to is called the universal wall fitting. It is not included with this part.
 Reply


?     Asked on 5/29/2016by jeabn izzi

Is there an o-ring available for replacement on this connector.
 Reply

A  Answered on 6/4/2016 by InyoPools Product Specialist Lennox H.

Hi Jeabn, The O-ring (322) is the replacement o-ring for this UWF Quick Disconnect.
 Reply


?     Asked on 7/9/2018by Inyo Visitor

Does product include part #41,filter screen?
 Reply

A  Answered on 7/9/2018 by InyoPools Product Specialist Hector F.

It does not. You would have to get the screen separately or purchase the entire UWF assembly part number 3263-81
 Reply


?     Asked on 7/13/2018by Craig Winterfeldt

The hose barb end of my UWF Quick Disconnect broke off in the hose. I just bought a new one(genuine part) at a dealer. I can get the new hose barb into the hose, however, once it is in the hose the outside diameter of the hose increase and I cannot get the nut to fit over it. Is there a trick to doing this or are there different diameter size hose barbs on the Quick Disconnect.
 Reply

A  Answered on 7/13/2018 by InyoPools Product Specialist Lennox H.

Hi, Craig. They're not different size barb. You might be installing the nut from the wrong side, it does not go over the barb to the barb. 
 Reply


?     Asked on 10/3/2018by Rhonda

The piece that broke on our fitting is the fitting that goes inside. We need the piece that fits inside the round circle on the disconnect.
 Reply

A  Answered on 10/4/2018 by InyoPools Product Specialist Lennox H.

Hi, Rhonda. The Pressure Relief Valve - 9-100-9002 is the part that you're looking for. 
 Reply