?     Asked on 4/26/2015by frank

does this display board for a M206A model paypak pool neater
 Reply

A  Answered on 4/27/2015 by InyoPools Product Specialist Lennox H.

Frank, This will work if your unit was manufactured after May/2011. 
 Reply

  • Commented on 12/30/2019 by Product Owner

    How can I find my manufacture date?
     Reply

    • Commented on 1/16/2020 by InyoPools Product Specialist Lennox H.

      Ryan, The serial number is on the service sticker. 
       Reply


?     Asked on 1/16/2020by gary johnson

Will this LCD display work with Model # P-M266A-EN-C S/N 1509283404? Is there any difficulty in installing this part and do I need any other parts if I replace this LCD Display? The display is barely visible but the unit is running fine. Thanks,
 Reply

A  Answered on 1/16/2020 by InyoPools Product Specialist Lennox H.

Hi, Gary. Based on the info provided, this replacement LCD Display will work with your unit. As for replacing it, it is quite simple. 
 Reply


?     Asked on 2/5/2020by DJ

Good Day, I'm looking for a new display for my RP2100 (P-R405A) S/N9910075700 Is this display the right part for my repair? Thank you for your time and have a great day. DJ
 Reply

A  Answered on 2/6/2020 by InyoPools Product Specialist Lennox H.

Hi, DJ. Unfortunately, this LCD Display Screen - 013640F is NOT compatible with your unit if you have the original PCB. The PC Board Control IID Unit - 010253F has been discontinued for your unit. 
 Reply

  • Commented on 2/6/2020 by Product Owner

    Ok...so here is the board that is currently in our heater(see attached pic). It was replaced at some point. So...back to my original question :) any ideas on how I can get the display replaced? Thank you so much for all your time and assistance. DJ

     Reply

    • Commented on 2/7/2020 by InyoPools Product Specialist Lennox H.

      DJ, Your only option is to purchase the PC Board Control IID Units w/ Control Panel - 017111F.
       Reply

  • Commented on 2/6/2020 by Product Owner

    I will have to look at it a bit closer later today. I think I saw a date written on the board that would indicate that it was replaced some time after original manufacture, which I believe was in 1999. I will try to get a model number off of the board and get back to you. Thank you again for your assistance.
     Reply


?     Asked on 5/1/2021by Jim Currie

Is this part comparable with P-R206A-EN-X?
 Reply

A  Answered on 5/2/2021 by InyoPools Product Specialist Patrick P.

Hi Jim, This will work if your unit was manufactured after May of 2011. The heater’s model and serial numbers are located on the rating plate found on the inside of the unit. To locate the rating plate, first loosen the door screw. Remove the door(s), pull up and out. The rating plate will be either a gold or silver color with the Raypak logo. The serial number will have 10 digits. The date code is found in the first four digits of the serial number, for example, a unit made in April of 2001 will have the first four digits read as 0104.
 Reply


?     Asked on 5/11/2021by Carlos Almanza

Hi I have model # P-m406a-en-c will this work for my unit?

 Reply

A  Answered on 5/11/2021 by InyoPools Product Specialist Patrick P.

Hi Carlos, Yes this is the correct LCD for the heater listed in your photo.
 Reply


?     Asked on 5/13/2021by Nick Simons

Does this fit ?

 Reply

A  Answered on 5/13/2021 by InyoPools Product Specialist Patrick P.

Hi Nick, Based on your serial # you would need this part # 013464F Raypak PCB and Display and not the item on this page.
 Reply


?     Asked on 5/25/2021by Jim S

Is there any documentation or instructions on how to install this part?
 Reply

A  Answered on 5/27/2021 by InyoPools Product Specialist Patrick P.

This Raypak PCB Board Kit Installation Instructions may help
 Reply


?     Asked on 6/1/2021by George Schirripa2155273161

Hello, wondering if this part will work for me. My heater no longer displays the temperature. All else works great with the heater. Appreciate your help. Than you, George

 Reply

A  Answered on 6/1/2021 by InyoPools Product Specialist Patrick P.

Hi George, Thank you for the photo! Based on your serial # and model # you will need this Raypak PCB Control Kit
 Reply

  • Commented on 6/2/2021 by Product Owner

    Wow, thank you for your quick response! I would have thought all i needed was the display portion. That's a big difference going from a small inexpensive part to a $300 part. Is that because of the make/model?
     Reply

    • Commented on 6/4/2021 by InyoPools Product Specialist Patrick P.

      I believe the difference is that the one you require is both the PCB and Display where this item is just the display. For your model when replacing you have to replace both.
       Reply


?     Asked on 6/5/2021by Brian

I have a Raypak P-R336A-EN-Y heater (serial # is 1204140001) and can no longer read the display. All else works perfect. Will the 013640F LCD Display fix the problem or do I need to replace the entire PC board?
 Reply

A  Answered on 6/5/2021 by InyoPools Product Specialist Danny R.

It could be either your display panel, board, or sensor.  At this point, I would recommend giving Raypak a direct call to see if they can direct you in the best direction to fixing this.
 Reply


?     Asked on 6/29/2021by Dio

My pool heater it is working fine however the LCD digital display is broken and I can't read the temperature in the LCD. Is the Display Screen - 013640F the correct replacement part to fix the issue ? Cheers

 Reply

A  Answered on 6/29/2021 by InyoPools Product Specialist Patrick P.

Hi Dio, We are showing that this is not the correct replacement. The proper replacement is this 017110F Board however this part has been discontinued by the manufacturer without a replacement. It might be time for a new heater, something like this Raypak 336AEN Pool Heater
 Reply

  • Commented on 6/29/2021 by Product Owner

    Thanks for the prompt reply. Unlucky I guess, it is hard to make that jump when it works perfectly fine sans the display Cheers
     Reply

    • Commented on 7/4/2021 by InyoPools Product Specialist Patrick P.

      Yeah, I agree. I probably would leave as is for the time being.
       Reply


?     Asked on 9/17/2021by Inyo Visitor

My boiler is working well and without any issues however the digital display has begun to fail and become illegible. Is this the correct replacement for my unit? Thanks.

 Reply

A  Answered on 9/17/2021 by InyoPools Product Specialist Craig C.

Hello.  The Raypak Heater PCB Control Kit 013464F is a compatible replacement Main PCB for your Raypak Heater model P-M266A-EN-C.   Raypak Heater PCB Control Kit - 013464F   The display board only is available as Raypak part number 013640F.   LCD Display Screen Only - 013640F
 Reply


?     Asked on 2/5/2022by Daryl

Hi, Heater works great but the display is funky. It functions perfectly but the digits on the very top for the temperature setting are not displaying anything legible. The current temperature display below that is fine. What part do I need to see the entire display? Thank you for any help advice you have on the part needed and installation instructions.

 Reply

A  Answered on 2/7/2022 by InyoPools Product Specialist Craig C.

Hello Daryl.  According to Raypak, the display is part number 013640F.  LCD Display Screen Only - 013640F     General installation instructions can be viewed on Youtube  Raypak, Pool Heater Model C-R206A Up To CR406A LCD   Attached please find the Installation and Operation Manual for the Raypak 406A Series Gas Heaters.  INSTALLATION AND OPERATION MANUAL
 Reply


?     Asked on 4/6/2022by Michael

I have a Model P-406A-EP-C and I need a new digital screen, what is the right part?

 Reply

A  Answered on 4/7/2022 by InyoPools Product Specialist Rich N.

Hi Michael, the display board for your P-M406A-EP-C heater is this Raypak part number 013640F.
 Reply


?     Asked on 9/18/2024by Joe

Is this the LCD part for my Raypak heater?

 Reply

A  Answered on 9/19/2024 by InyoPools Product Specialist Rich N.

Hi Joe, yes, but those have not been available for quite a while.  You may need to get a new Raypak PC Board Control Replacement Kit for Digital Gas Heater - 100-10000345.  
 Reply