how do you install pump? i am trying to do it myself. i bought this exact combo and do not know where to begin. how do you ground it so you don't get shocked? can i just plug it in to my outside receptacle? how do you set up the filter?
Reply
Here is a link to the owners manual that will help with the installation process.http://www.inyopools.com/owners_manual/sta-rite_pump_filter_waterford.pdf
Reply
Hi. I have the start rite 210wf and the directions that go around the top of the valve cover plug can no longer be read. It's the sticker that says where to turn valve for backwash and that stuff. Can those stickers be purchased.,also the pressure valve on the sand tandem needs replac3d where do I find those. Ty
Reply
I have the T-210WF and need a new standpipe with laterals do they still make them?
Reply
Hi, Matt. The Standpipe Hub Assembly - WC137-517P and the Lateral - 24600-0003 are sold separately.
Reply
I need a new valve for Sta-Rite T-210WF but I cant seem to find a Pentair part number. Can you help me?
Reply
I have the T-210WF filter and the o-ring that goes over the standpipe to seal to the multi-port valve is missing. I believe this is making the water bypass the sand filter. What size o-ring do I need and do you sell it here?
Reply
Hi, Scott. You're referring to the Tank Flange O-ring - U9-369. You can also use the Sta-Rite Waterford System Parts Diagram to locate other replacement parts.
Reply
is the Pentair 24203-0034 Pipe Hose Assembly the replacement hose for a sta-rite t210wf 200 pd sand filter to jwpas5f-2a4 pump that is 2 inch pipe?
Reply
Hi, Curtis. The Union Hose Assy - 24203-0034 is the correct one for your system.
Reply
What size backwash hose do I need for this pump?...1-1/2" or 2"
Thanks
T-210WF Sta-Rite
Reply
I would recommend using 2-inch backwash hose. Those ports hence the fittings typically used on them are 1.5 inches. This way you will be able to go over that pvc or fittings then use a hose clamp to secure it.
Reply
I have a sta rite t-210-wf high rate sand filter that is leaking at the drain. What is the correct replacement drain cap?
The drain cap is this Item # 154711 Drain Cap. The oring is this Item # 154715 Sand Drain Gasket. Please note you may require part 154711 as well
Reply
We have a JSAL 210f-3 above ground sand filter. While on filter, water slowly comes out of back wash port. If we want to replace the whole 5 port valve unit, what part number would we order?
Reply
Could you send us a few photos? Please send us an image of the valve and of the top label that should be on the valve itself. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
