Can I purchase 10 foot sections instead of 5 foot sections?
Reply
Typically these come in 10FT sections from the manufacturer but we have them cut into 5FT sections so that we can ship them via UPS instead of freight truck. This saves the customer a great deal in shipping costs.
Reply
do they make a 90 degree corners I redoing existing pool drain much smaller and
adding concrete pavers
Reply
Hi Ed, yes you can find the 90 Degree Corners here
Reply
how do you connect them together?, Do they come with unions?
is the channel connector for regular drain included?
Reply
Hello Jaime, For the Stegmier CD3T-5 CHANNEL DRAIN TAN CASE OF 16 - 5 Ft. SECTIONS (80 FEET) comes with 8 couplers, which is how they would connect together. You would also need one of the drain adapters to connect to your drainage line.
Reply
I have 4 sections in need of a repair. Do you sell just the top so the old can be cut out and replaced with a new top?
Reply
Hello Scott, There is not a top to these Channel Drains that can be removed or cut out. They are a one piece molded product that would need to be removed and replaced if you have any broken sections.
Reply
Do you sell a screened end cap, to avoid insects/rodents from getting inside?
Reply
Hello Patrick, We do not have a channel drain end cap with a screen. We do carry the Deck Drain End Plug Case 10 but it is a solid end cap.
Reply
Is there something that can be installed to stop mosquitos from getting in through drain
Reply
Unfortunately we do not have any part or accessory available to prevent mosquitoes from getting into the drain.
Reply
Can this drain be installed as a curved design? If not, do you have one that does?
Reply
Hi, Amy. Unfortunately, it can not be installed as a curve. However, it can be installed as with a Cross, Tee, 45 degree angle, and a 90 degree angle. We do not have drains that are flexible enough to be curved.
Reply
is there a material to place with drain to seal any gaps between the drain and deck if a small gap is present to seal off the water flow?
Reply
Hello Mike, this looks like one custom molded product, there are not any other part/pieces aside from the connector parts.
Reply
