How do I know which replacement grids I should order?
Reply
Typically, the filter label will contain the filter model and square footage of your grids. If the information on the label can not be read, you can measure the length (top to bottom) of the grid and multiply by 2 to get the square footage. For example: A 12" grid length would mean that the square footage is 24.
Reply
Where is the placement of the small filter grid fit on the filter manifold for a Titan CM 60 sq. ft. Filter Model # 67026000 (American Products)?
Reply
Hi. The Small Grids is placed in the right available port in the manifold.
Reply
Do you carry the full size panels for the Hayward DE 6020 ?
I only see the short panel offered
Thanks
Gordon
Reply
I am assuming you are talking about the full grids? 7 are required and you can find them by clicking on the following link... 60 Sq. Ft. Full Grid 30" (7 Required) - FG1005
Reply
have a pentair fnsp-60 de filter. Partial Grid is damaged and needs replacing. The other full grids are fine. Is this (PL0173, 31" L X 9" W X 5" D) the correct one too order?
Reply
Hello Terry. The 60 Sq. Ft. Partial Grid 30" (1 Required) - PL0173 is compatible with the Pentair FNS Plus 60 sq ft DE Filter. It is recommended that the Standpipe o-ring be replaced whenever the top manifold is removed from the outlet standpipe.
Reply