?     Asked on 8/29/2014by Guest

How do I know when these wheel bearings, Hayward part number AXV055P, have gone bad?
 Reply

A  Answered on 8/29/2014 by InyoPools Product Specialist Patrick P.

The wheel bearings have gone bad if you ever see small ball bearings in your pool, pump basket or filter. The cleaner will stop moving if the turbine bearings fall apart.
 Reply


?     Asked on 4/27/2015by barb

how do i know what bearings to purchase where would i find numbers if needed
 Reply

A  Answered on 4/27/2015 by InyoPools Product Specialist Robert M.

Hello Barb - These turbine bearings will work in the Hayward Aquadroid, Elite, Aquabug, Pool Vac Classic, Pool Vac, Navigator, Pool Vac Ultra, Diver Dave, Wanda Wha;e, Navigator Pro, and Pool Vac XL. If your cleaner is not listed, these are not the correct bearings.
 Reply


?     Asked on 7/13/2016by Peter Bolton

Will replacement bearings for the main rotor of my Arneson pool-vac also fit the A frame? Or can the bearings for the A-frame be bought separately without dismantling the whole frame?
 Reply

A  Answered on 7/20/2016 by InyoPools Product Specialist Lennox H.

Hi Peter, The turbine bearings can not be used for the A-Frame and the A-Frame bearings are not sold separately. You will have to replace the entire A-Frame Kit (AXV621D).
 Reply


?     Asked on 1/20/2019by Lyle

Will this bearing work on a Hayward pool cleaner, Navigator Pro, model #925ADC?
 Reply

A  Answered on 1/21/2019 by InyoPools Product Specialist Michelle B.

Hello, Yes, these would be the same bearings.
 Reply


?     Asked on 5/23/2020by ALEJANDRO DELGADO

I bought a Hayward Blucon cleaner from you a while back. Will these bearings fit it?
 Reply

A  Answered on 12/3/2020 by InyoPools Product Specialist Hector F.

Alejandro, yes these bearings are compatible with the Hayward Blucon pool cleaner. 
 Reply


?     Asked on 5/14/2021by David Parisi

Do these bearing come with the clips that hold them in place? If not, where does one get them?
 Reply

A  Answered on 5/15/2021 by InyoPools Product Specialist Patrick P.

Hi David, No clips do not come with these bearings. Could you send us a few photos? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 6/23/2021by RAYMOND PLUNKETT

Are these for a 1 hp. hayward super pump
 Reply

A  Answered on 6/24/2021 by InyoPools Product Specialist Robert M.

No, these are bearings for a Hayward pool cleaner. A 1HP Super Pump motor would require two 6203 motor bearings.
 Reply