?     Asked on 7/31/2012by Guest

The part number on my pool pump case is Sta-Rite P2RA5. Does your part listed here fit this pump?
 Reply

A  Answered on 7/31/2012 by InyoPools Product Specialist Patrick P.

Yes this Tank Body will fit any of the Sta-Rite Dura-Glas pool pumps with the model # starting with P2RA.
 Reply


?     Asked on 1/25/2016by FB

My Starite pump's tank body is identical to this. Notice that the groove where the oring sits is flat. The oring that i took off and trying to replace resembles the shape of the groove( flat band like ring). Is there an oring of this shape or its just a typical oring with round body that just got flatened through time between the seal plate and tank body plate. What is the correcft part number oring I must use?
 Reply

A  Answered on 1/25/2016 by InyoPools Product Specialist Megan C.

Hello, FB. Yes, the O-Ring can become flattened over time due to the compression of the two parts. The correct Seal Plate O-Ring for the Sta-Rite Dura-Glas and Max-E-Glas is PART# 5056-06. You may use link http://www.inyopools.com/pool_parts_jandy_stealth_original_2005_and_prior_.aspxas the guide for other parts available for the pump(s).
 Reply


?     Asked on 2/10/2017by Inyo Visitor

how do you replace tank body on sta-rite pump
 Reply

A  Answered on 2/10/2017 by InyoPools Product Specialist Scott W.

If the plumbing is glued into the port then you will need to cut the plumbing and re-plumb the new tank body.
 Reply


?     Asked on 5/27/2020by Mary Ann Deisseroth

Does Tank body include the drain plug?
 Reply

A  Answered on 5/27/2020 by InyoPools Product Specialist Patrick P.

Hi Mary, No the drain plug is not included
 Reply


?     Asked on 5/27/2020by Brian

The part number I have is c76-47p is this the same part

 Reply

A  Answered on 5/28/2020 by InyoPools Product Specialist Hector F.

Yes, this will be the replacement part for your c76-47p. 
 Reply


?     Asked on 5/29/2020by Ricardo Herrera

Will this tank body work on model number P4RA6G-152L?
 Reply

A  Answered on 10/20/2020 by InyoPools Product Specialist Hector F.

Hi Ricardo, so for the model P4RA6G-152L Sta-Rite Dura-Glas II and Max-E-Glas II series the pump body is part number 5055-16
 Reply


?     Asked on 1/22/2021by Hayden A.

Hi, I got an old pump with model number C76-47P as shown attached I searched for this model however the C176-47P1 (model you're showing here) pops up instead. Are these two models equivalent and interchangeable?

 Reply

A  Answered on 1/27/2021 by InyoPools Product Specialist Hector F.

Hi Hayden, yes this is the correct tank body for your Sta-Rite Dura Glas/ Max E Glas pool pump series. 
 Reply


?     Asked on 5/24/2021by Jim

What is the outside diameter of the body?
 Reply

A  Answered on 5/24/2021 by InyoPools Product Specialist Patrick P.

Hi Jim, That dimension is 11-1/8" please click here for Dimensions of Tank Body - C176-47P1
 Reply


?     Asked on 3/1/2022by robert watson

Do this work with Stay Rite model PE 5F-1261? If not, can you point me to what does? Also what are o rings needed to replace this part? Can you provide reference?

 Reply

A  Answered on 3/1/2022 by InyoPools Product Specialist Rich N.

Hi Robert, the Tank Body - C176-47P1 will work perfectly with your PE5F-126L Sta-Rite pump.  The GOKIT6 will have all new o-rings and a new motor shaft seal for your pump.   
 Reply


?     Asked on 7/3/2022by Thomas Gagnet

Will this tank body c176-47p1 work with sta rite P2RA5D-120L?
 Reply

A  Answered on 7/4/2022 by InyoPools Product Specialist Craig C.

Hello Thomas.  The Tank Body - C176-47P1 is compatible with the Sta-Rite Dura-Glas Pump model P2RA5D-120L.
 Reply


?     Asked on 9/7/2022by Chong J Kim-Cohen

Before I purchase this part, I need to know the sizes (diameter) of PVC pipe I need to go from the tank body to the DE Filter. I don't want to cut anything before I have all the right parts. After almost 20 years, the tank body plate has developed cracks and the epoxy doesn't control the leaks anymore. It's still hot here in Texas and I want to use my pool without losing water. Thanks. Photo enclosed.

 Reply

A  Answered on 9/7/2022 by InyoPools Product Specialist Craig C.

Hello.  The Tank Body C176-47P1 has 1 1/2 " female inside pipe threads.  The Pool Pump Union 1.5" Male x 1.5" Socket - 21063-150-000 can facilitate installation.  Per the photo attachment, the current pipe diameter is 1 1/2".  
 Reply


?     Asked on 6/5/2024by Inyo Visitor

Our sta-rite pump is U27-890 Will this fit

 Reply

A  Answered on 6/5/2024 by InyoPools Product Specialist Robert M.

We were unable to cross-reference that U27-890 directly to a Sta-Rite pump model. However, it is commonly associated with the Sta-Rite Dura-Glas and Max-E-Glas. I've attached an image of the Dura-Glas pump. If it looks like that, the C176-47P1 tank body will work. Note: Some versions of the Dura-Glas do not have the strainer pot attached to the front.

 Reply