Needing the filter grid replacement number for the following filter:
75DE-HK6-NAMCO
Reply
HI Don, The LS70 Grid Cassette (42355800R000) will be the correct repacement for your 75DE-HK6-NAMCO Filter.
Reply
I have a splash Pak d.e. Filter, I need replace the grids, they are 18" long .Would the 42356206R be the correct item to order. I do not know the model number,however the picture of the filter with this item is from my manual
Reply
Hi Edna, The LS55 Grid Cassette-42356709R is the correct you'll need to replace you grids base on the size grid you have.
Reply
I hAve a splash pak de filter. I need to order six grids for the filter. m not sure what size I need. I measured them myself and they are 7x12. The diagram you have for a Jacuzzi design filter is exactly what I have. There are quite a few part numbers. It takes six grids. 42356907r sp40 sp50. None of these say six grids. Hope you can help me.
Reply
Hi Sandy, Base off the the measurement of your grids provided the LS40 Grid Cassette is the correct size you'll need.
Reply
Will this manifold fit the inside of my filter tank bottom it measures 6. 1/4 circular diameter
Reply
Hello Joe, In order to better assist with answering your question, I will need the make and model information of your filter. Then I would be able to determine the correct manifold for your filter. Unfortunately, we do not have a part reference based on size.
Reply
I need a replacement filter grid for my filter. The actual filters are 2-7in x12in and 4-8 1/2in x12in. Can you recommend the model that I need. The model of filter is 40DE-HK6-NAMCO. ORDER # 94087871 and the serial number is 096768. Thank you
Reply
Hi, Keary. The LS40 Grids are the size that you would need for that model unit.
Reply
I have a filter, 75DE-HK6-NAMCO and need to replace all of the grids, or the whole assembly. What should I order?
Reply
Hi, Brandon. You will need the Grid Cassette Assy - 42355800R000 for your model filter.
Reply
why cant I use a ls body to replace my splash pak body they take the same LS40 filter grid assembly and the same lid. thank u
Reply
Hi, Larry. Based on the cross reference info we have and confirming with the manufacturer the LS Body or Lid is not compatible with the Splash Pak DE40 filter.
Reply
Which cassette do I need so I can replace ours? In disrepair and needs to be replaced. Thanks
Hi Dora, Could you send a wider shot showing the entire filter? Also could you let us know the measurement of the overall height of the filter?
Reply
