?     Asked on 2/4/2015by Martin Godinez

Does this part fit a Hayward Micro Clear d.e. Filter model number DE4800?
 Reply

A  Answered on 2/5/2015 by InyoPools Product Specialist Robert M.

Hello Martin - This clamp will not work with the Micro Clear DE4800. The clamp for the DE4800 is obsolete and no longer available. We do not have a suggested replacement.
 Reply


?     Asked on 5/17/2015by charles heslin

how can I replace this part and prevent it from leaking. doesn't seem to be sealing right any suggestions?
 Reply

A  Answered on 5/18/2015 by InyoPools Product Specialist Lennox H.

Charles, If you've tighten the clamp as far as it cam go and water still leaks you may need to replace the diaphragm.
 Reply


?     Asked on 7/15/2015by Diane Tucker

Does this fit Swim Clean Cartridge Filter Serial #1254B, Model #'s on it are C2020,C3020, C4020, and C5020. The long screw is stripped on mine and I can no longer tighten the coils. Please Help!!!
 Reply

A  Answered on 7/20/2015 by InyoPools Product Specialist Lennox H.

Hi Diane, The Clamp Assembly W/springs (ec-50c) (ecx5000c) will not work with the Swim Clean Cartridge Filter, you will need the Clamp Assembly (DEX2420J).
 Reply


?     Asked on 10/23/2015by Joe

Will this fit, D.E.filter 3600 Showing original DEX 2421J2
 Reply

A  Answered on 10/23/2015 by InyoPools Product Specialist Lennox H.

Hi Joe, The EC-50C Clamp Assembly w/ Springs (ECX5000C) will not fit a Hayward DE3600 Filter.
 Reply


?     Asked on 4/28/2016by Damian

will this clamp assembly work with the DE7220 filter (pre-2008, old style). it looks the same as the one on the tank now.
 Reply

A  Answered on 4/29/2016 by InyoPools Product Specialist Lennox H.

Hi Damian, This clamp assembly will not fit the DE7220 filter, you will need p/n DEX2421JKIT.
 Reply


?     Asked on 5/1/2016by Mike

I'm guessing obsolete as well (since the filter is over 25 years old), but would this fit the MicroClear DE-6020?
 Reply

A  Answered on 5/3/2016 by InyoPools Product Specialist Lennox H.

Hi Mike, This Clamp Assembly can not be used with the Hayward MicroClear DE Filter.
 Reply


?     Asked on 5/4/2016by Yianni

I have a10 year old Hayward cartridge filter Model C4520BH (Blue Haven Pool). Nut and bolt are stripped and need replacement. Any recommendations? Should I also replace the O ring? Help.
 Reply

A  Answered on 5/6/2016 by InyoPools Product Specialist Lennox H.

Hi Yianni, You will have to replace the Clamp Assembly (DEX2421JKIT) and the Tank O-ring (DEX2400K) if it hasn't been replaced within the last couple years.
 Reply


?     Asked on 5/31/2016by Ray

Is this the correct clamp and assembly for the blue haven hayward de filter c4520bh? If not can you give me the part number?
 Reply

A  Answered on 6/2/2016 by InyoPools Product Specialist Lennox H.

Hi Ray, The Clamp Assembly - DEX2421JKIT is the correct clamp for the C4520BH filter.
 Reply


?     Asked on 5/31/2016by Ray

The clamp above loks corect but you suggested a different one to another customer for the blue haven hayward cartridge filter c4520bh.
 Reply

A  Answered on 6/2/2016 by InyoPools Product Specialist Lennox H.

Hi Ray, This clamp may resemble the clamp for the C4520BH filter but it will not fit. The DEX2421JKIT Clamp will fit the C4520BH filter.
 Reply


?     Asked on 6/13/2016by Herrera

Will this clamp assembly W/spring (ec-50c) (ecx5000c) Part # 4810-37A fit my swim clear model # c3025
 Reply

A  Answered on 6/13/2016 by InyoPools Product Specialist Patrick P.

Hi Herrera, no this clamp does not fit the Swim Clear C3025 Cartridge, you would require this Hayward Swim Clear Clamp 
 Reply


?     Asked on 6/18/2016by Eddie

I would like to know if this product fits my system model # K48L2N104
 Reply

A  Answered on 6/18/2016 by InyoPools Product Specialist Patrick P.

Hi Eddie, that model # you gave is for your electric motor which attached to your pump. Could you supply us with the model # of your filter, there should be a label on the side of the filter tank with this information. Also feel free to email us a few photos as this will help us determine the correct part for you.
 Reply


?     Asked on 6/25/2016by Ed

when I bump the filter to clean it water comes out around the ban
 Reply

A  Answered on 7/2/2016 by InyoPools Product Specialist Lennox H.

Hi Ed, You'll need to replace the Diaphragm Gasket (ECX5000G).
 Reply


?     Asked on 7/31/2016by tonia

The clamp that holds the filter head to the body has a stripped screw . I have a IS-DE2400-86 filter model, can I buy a new clamp and what part number would be compatible? Thank you for your reply.
 Reply

A  Answered on 8/4/2016 by InyoPools Product Specialist Lennox H.

Hi Tonia, This clamp assembly is not compatible with the Hayward DE2400. The clamp for that model is no longer available.
 Reply


?     Asked on 8/6/2016by sal vinci

I would like to know if this product fits my system Hayward Micro Clear D.E.48 sq ft.
 Reply

A  Answered on 8/16/2016 by InyoPools Product Specialist Stacey M.

Hello Sal, part 4810-37A goes to Clamp Assembly W/springs for model (ec-50c) (ecx5000c) and will not fit the Micro Clear, the clamp for that is obsolete and no longer available.
 Reply


?     Asked on 8/13/2016by Debbie

Will this fit a Hayward SuperStar Clear?
 Reply

A  Answered on 8/20/2016 by InyoPools Product Specialist Lennox H.

Hi Debbie, This Clamp Assy will not fit the Hayward SuperStar Clear filter, there is not a clamp available.
 Reply


?     Asked on 8/14/2016by Gil

Does this clamp fit on model numbers C4520CP and C5520CP.?
 Reply

A  Answered on 8/20/2016 by InyoPools Product Specialist Lennox H.

Hi Gil, This clamp assembly will not fit the C4520CP and C5520CP model filters, you will need p/n DEX2421JKIT.
 Reply


?     Asked on 8/17/2016by Gilbert

?I'm looking at part Clamp Assembly W/springs (ec-50c) (ecx5000c). Does this fit Hayward C4520CP or C5520CP
 Reply

A  Answered on 8/17/2016 by InyoPools Product Specialist Lennox H.

Hi Gilbert, This clamp assembly will not fit the Hayward C4520CP filter, you will need the Hayward Clamp Assembly - "DEX2421JKIT".
 Reply


?     Asked on 8/19/2016by Steve Nimerosky

Will this fit the C4000 Hayward Series to perhaps replace the (DEX 2400J) ?
 Reply

A  Answered on 8/19/2016 by InyoPools Product Specialist Stacey M.

Hello Steve, Unfortunately The Clamp Assembly W/springs (ec-50c) (ecx5000c) will not work with replacing the Clamp DEX360J it is obsolete and no longer available.
 Reply


?     Asked on 10/19/2016by Bob

Busted the bolt on my Hayward filter clamp. Will this replacement clamp fit a Hayward C4000 filter?
 Reply

A  Answered on 10/20/2016 by InyoPools Product Specialist Alan M.

Hello Bob- Unfortunately this clamp assembly will NOT fit the Hayward C-4000 Filter. The clamp for the C-4000 is obsolete and we do not have an alternative available at this time.
 Reply


?     Asked on 11/2/2016by Gonzalo

Good Day This ite, work for Model DE-2400 Hayward Filter?
 Reply

A  Answered on 11/2/2016 by InyoPools Product Specialist Scott W.

The one you need for the DE2400 is part number 4811-100. Part number 4810-37A is for the Perflex EC50.
 Reply


?     Asked on 11/17/2016by MJ

Hello, Will this clamp assembly fit a Hayward Pro Grid DE4820 filter? Thank you.
 Reply

A  Answered on 11/17/2016 by InyoPools Product Specialist Scott W.

The correct clamp assembly for the DE4820 is part number 4811-100.
 Reply


?     Asked on 11/24/2016by Robert Miller

Does this fit the hayward model C4000?
 Reply

A  Answered on 11/28/2016 by InyoPools Product Specialist Lennox H.

Hi, Robert. This clamp assembly will not fit the Hayward C4000 filter. Unfortunately, the clamp for the Super Star Clear Cartridge Filter is no longer available.
 Reply


?     Asked on 2/19/2017by Marlain

Does this item fit Hayward micro clear vertical grid D.E. filter series DE2400? If not is there one that will work with this series? Thanks
 Reply

A  Answered on 2/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Marlain. This clamp will not fit the DE2400 filter. There is not a replacement available for the Micro Clear filter.
 Reply


?     Asked on 3/17/2017by Pete

Will this clamp work as a replacement for a HAYWARD DE6000 Filter? If so does it come with nut and bolt as well? Original Part # DEX2400J
 Reply

A  Answered on 3/17/2017 by InyoPools Product Specialist Lennox H.

Hi, Pete. This clamp assembly will not fit the DE6000 filter. The clamp assembly for the DE6000 is no longer available with no replacement.
 Reply


?     Asked on 4/21/2017by Inyo Visitor

will tthis clamp work on C2030?
 Reply

A  Answered on 4/21/2017 by InyoPools Product Specialist Scott W.

The correct clamp assembly for your Hayward C2030 is part number 4811-100.
 Reply


?     Asked on 5/22/2017by Don Doud

Will this "Clamp Assembly W/springs (ec-50c) (ecx5000c) work in place of the DEX2420J Clamp Assembly on the Hayward SwimClear Models 2020/3020/4020/5020?
 Reply

A  Answered on 5/24/2017 by InyoPools Product Specialist Lennox H.

Hi, Don. This Clamp Assembly - ECX5000C will not replace the DEX2420J which will fit the Swimclear model filter.
 Reply


?     Asked on 6/11/2017by Mark

Will this clamp fit a Hayward DE-3600 filter? The model number of the part in the Owner's Guide is DEX2400-J.
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Patrick P.

Unfortunately Hayward discontinued the DEX2400J Clamp and does not have a replacement clamp. If this clamp has gone bad then you will need a Complete new DE3620 Hayward DE Filter.
 Reply


?     Asked on 6/11/2017by pat

will this clamp fit Hayward dex2400
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Hector F.

No, unfortunately the clamp for your filter model is an obsolete item with no listed replacement.
 Reply


?     Asked on 6/25/2017by Al

if i order this part when will it arrive . i live in north versailles pa.
 Reply

A  Answered on 6/26/2017 by InyoPools Product Specialist Lennox H.

Al, You can receive this item 3 business days after it ships. 
 Reply


?     Asked on 7/25/2017by Inyo Visitor

Will this fit the Hayward 450-550 Series Smartfilter?
 Reply

A  Answered on 7/25/2017 by InyoPools Product Specialist Lennox H.

Hi. No, this Clamp Assembly will not fit the Hayward Smartfilter 450-550 models. You will need the Clamp Assembly - DEX2421JKIT.
 Reply


?     Asked on 7/30/2017by Mike

Will this clamp fit an old Haywood above ground filter (DE 3600 - Micro Clear Filter). The Haywood part number is DEX 2400J Clamp Assembly.
 Reply

A  Answered on 7/30/2017 by InyoPools Product Specialist Alex V.

Mike, Unfortunately, this will not fit the DE3600. 
 Reply


?     Asked on 7/30/2017by Mike

Do you have a clamp that will fit the DE 3600? Or, at least have the bolt? The bolt is all I really need.
 Reply

A  Answered on 8/18/2017 by InyoPools Product Specialist Stacey M.

Hello Mike, for the model de3600 we have the Nut, Brass Sleeve 5/16"-24 (v60-110)
 Reply


?     Asked on 8/7/2017by Wayne

Is there a replacement Clamp assembly for the Hayward c4000 filter
 Reply

A  Answered on 8/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Wayne. Unfortunately, there is not a replacement clamp assembly for the Hayward C4000 filter. 
 Reply


?     Asked on 9/1/2017by Greg

I need a clamp assembly replacement for Hayward Filter...Model #C4520
 Reply

A  Answered on 9/1/2017 by InyoPools Product Specialist Lennox H.

Hi, Greg. The Hayward Clamp Assembly - DEX2421JKIT is the replacement for the C4520 filter. 
 Reply


?     Asked on 9/6/2017by Inyo Visitor

Is this the clamp assembly that I need for filter model # DE-4800?
 Reply

A  Answered on 9/8/2017 by InyoPools Product Specialist Lennox H.

Hi, Raul Casas. This clamp assembly will not fit the DE-4800 filter. There is not a replacement clamp assembly available for the DE-4800 filter.
 Reply


?     Asked on 12/9/2017by tom harris

does this clamp assembly 4810-37a fit the hayward c3020 pool filter
 Reply

A  Answered on 12/11/2017 by InyoPools Product Specialist Michelle B.

Hi Tom, Unfortunately, the clamp assembly 4810-37a will not fit the Hayward c3020 pool filter.
 Reply


?     Asked on 3/26/2018by KIM

Does this fit teh Hayward DE-2400-Z-10 filter?
 Reply

A  Answered on 3/26/2018 by InyoPools Product Specialist Megan C.

Hello. No, that belongs to the Hayward Perflex D.E. Filters EC-50, EC-50A, EC-50C & EC-50AC models. The clamp DEX2400J for the Hayward Micro Clear D.E. FILTER MODEL #'S: DE2400, DE3600, DE4800, DE6000 has been discontinued by the manufacturer, it is obsolete, it is no longer available to order. 
 Reply


?     Asked on 4/25/2018by anthony

will this fit a pro-grid 6020 DE filter??
 Reply

A  Answered on 4/25/2018 by InyoPools Product Specialist Hector F.

No, the correct clamp assembly for the Pro Grid series is the 4811-100.
 Reply


?     Asked on 5/9/2018by PETER CALIN

is this clamp good for model c 3000
 Reply

A  Answered on 5/10/2018 by InyoPools Product Specialist Hector F.

Unfortunately, the clamp assembly for the Hayward c-3000 series filter is no longer available with no listed replacement. 
 Reply


?     Asked on 6/19/2018by robles

hi the clamp that we have has two springs and the one showing has one only our model is de 3600. im I looking at the wrong item
 Reply

A  Answered on 6/19/2018 by InyoPools Product Specialist Megan C.

Here is the link to the Hayward Micro Clear D.E. Schematic http://www.inyopools.com/pool_parts_hayward_micro_clear_d_e_.aspx unfortunately, the clamp assembly is now obsolete. The alternative is the Hayward Pro Grid DE Filter 36 Sq Ft w/o Valve - DE3620
 Reply


?     Asked on 2/24/2019by Garry Timple

I have a Hayward DE3620 filter and I need a new clamp because the screw stripped out. Will this clamp fit this filter?
 Reply

A  Answered on 2/24/2019 by InyoPools Product Specialist Lennox H.

Hi, Garry. This Clamp Assembly - ECX5000C will not fit the DE3620 model filter. You will need the Clamp Assembly - DEX2421JKIT
 Reply


?     Asked on 3/28/2019by Danny

Do you the length of this clamp? I have a Hayward 325 Series Cart Filt System
 Reply

A  Answered on 3/29/2019 by InyoPools Product Specialist Lennox H.

Hi, Danny. This clamp assembly will not fit a Hayward 325 cartridge filter system. You will need to use the Clamp Assembly Kit - DEX2421JKIT.
 Reply


?     Asked on 5/9/2019by Inyo Visitor

I have the Hayward EC50C93S. I have the clamp assembly but it looks like my girlfriend threw out the spring, washers, and nut during spring cleaning. (Come on, just because it looked like a hurricane went through the garage, I knew where everything was!) Is it possible to just buy the spring, washers, and sleeve nut?
 Reply

A  Answered on 5/14/2019 by Industry Professional

the only part that is sold separate is the sleeve nut part# ECX360JN - the clamp assembly ECX5000C will have the springs & washers.
 Reply


A  Answered on 5/14/2019 by Industry Professional

Unfortunately no. The mfg changed it to a kit several years ago. The only part you can get seperate is the clamp nut part # 17-150-1442
 Reply


?     Asked on 5/22/2019by louis

Will this fit the pentair clean and clear plus?

 Reply

A  Answered on 5/22/2019 by InyoPools Product Specialist Patrick P.

No this does not fit the Pentair Clean and Clear Plus. You will need this Pentair Clean and Clear Plus Clamp Assembly
 Reply


?     Asked on 5/31/2019by Rick

I have a Hayward Swimclear C3025. The bolt is stripped on mine. Will this clamp work with this unit?
 Reply

A  Answered on 5/31/2019 by InyoPools Product Specialist Hector F.

The clamp assembly part number for your filter is 4811-100.
 Reply


?     Asked on 6/2/2019by Anthony

Does this fit a Hayward model DE6000
 Reply

A  Answered on 6/3/2019 by InyoPools Product Specialist Patrick P.

Unfortunately, Hayward discontinued the clamp assembly for the Micro-Clear DE filter quite a few years back and with no replacement. I believe there may have been some safety concerns with the clamp on that filter. This means that if your clamp assembly on your Micro Clear has gone bad then you will need to replace the entire filter. The Hayward Pro-Grid DE Filter is the replacement for the Micro Clear. We have also had some customers take there old Micro Clear clamp to a machine shop to see if they could repair the clamp.
 Reply


?     Asked on 6/15/2019by Tony P

Does the ECX5000C clamp kit fit the DE3600?
 Reply

A  Answered on 6/19/2019 by InyoPools Product Specialist Lennox H.

Tony, no, the Hayward Pool Products Clamp Assembly w/ Springs f/ EC-50C - ECX5000C will not fit the DE3600. The clamp assembly has been discontinued with no alternate replacement. 
 Reply

  • Commented on 6/20/2019 by Product Owner

    The clamp you show me does not look the the clamp on my filter: but theECX5000C looks correct. I am confused
     Reply

    • Commented on 6/25/2019 by InyoPools Product Specialist Lennox H.

      Tony P, The Clamp Assembly w/ Springs - ECX5000C may resemble your clamp, however, will not fit.  
       Reply


?     Asked on 6/18/2019by Inyo Visitor

Will this assembly fit a Hayward 4500 DE filter
 Reply

A  Answered on 6/18/2019 by InyoPools Product Specialist Lennox H.

Hi. This Clamp Assembly - ECX5000C will NOT fit a Hayward 4500 DE filter.
 Reply


?     Asked on 6/21/2019by Roger Burdette

Will it fit C5520BHMB?
 Reply

A  Answered on 6/25/2019 by InyoPools Product Specialist Kevin G.

No, that will not be the correct part. You will need 4811-100.
 Reply


?     Asked on 6/23/2019by christine

I have the Hayward DE3620b filter and the clamp assembly looks just like this with the T bolt. I know you said this would not fit the DE3600 series. All I need is the T bolt? Im being told they discontinued the bolt as I only need that? Can you tell me how long the bolt is in this assembly?
 Reply

A  Answered on 6/24/2019 by InyoPools Product Specialist Matt S.

Unfortunately, there is no spec listed for the bolt; but this clamp is not going to work for the DE3620 either.
 Reply


?     Asked on 6/25/2019by Kim

Is the this clamp assembly that will fit C4520.... cartridge filter made by Hayward for Blue Haven Pools, Inc.
 Reply

A  Answered on 6/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Kim. This Clamp Assembly will not fit, you will need P/N DEX2421JKIT
 Reply


?     Asked on 6/26/2019by mike

we have a hayward micro clear DE I need the filter clamp hayward part number dex2400j do you have it or a replacement clamp with a different part number that will fit this filter ...thanks mike
 Reply

A  Answered on 6/26/2019 by InyoPools Product Specialist Lennox H.

Hi, Mike. Unfortunately, we do not have anything that will work for the Hayward MicroClear D.E. filter.
 Reply


?     Asked on 6/28/2019by Inyo Visitor

Looking for a replacement clamp for my pool clamp ring but not sure which one will fit. Can you help? See pic

 Reply

A  Answered on 6/28/2019 by InyoPools Product Specialist Lennox H.

Hi. The correct replacement Clamp Assembly for your mode filter is P/N DEX2421JKIT.
 Reply


?     Asked on 7/5/2019by Kevin Shea

I am looking for a clamp assembly for a C 2020 series Hayward filter
 Reply

A  Answered on 7/7/2019 by InyoPools Product Specialist Lennox H.

Hi, Kevin. The Clamp Assembly Kit - DEX2421JKIT is the correct replacement. 
 Reply


?     Asked on 7/30/2019by Art

is this for a 40 gallon filter tank
 Reply

A  Answered on 7/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Art. This Clamp Assembly is used with the Hayward Perflex EC-50C model filter. 
 Reply


?     Asked on 8/4/2019by Inyo Visitor

Will this work on Hayward C3025?
 Reply

A  Answered on 8/4/2019 by InyoPools Product Specialist Lennox H.

Hi. Unfortunately, it will NOT. The Clamp Assembly Kit - DEX2421JKIT is the correct replacement.
 Reply


?     Asked on 8/18/2019by steve

will this fit a hayward micro clear de 50 psi, model number de6000
 Reply

A  Answered on 8/18/2019 by InyoPools Product Specialist Lennox H.

Hi, Steve. Unfortunately, it will NOT. The replacement clamp is no longer available.
 Reply


?     Asked on 8/25/2019by Candice

I have the Hayward de2420l filter. Can you tell me which clamp will fit this filter?
 Reply

A  Answered on 8/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Candice. You will need the Clamp Assembly Kit - DEX2421JKIT for your model filter. 
 Reply


?     Asked on 9/22/2019by Paul Bell

I have an old style C4020 with a metal clamp band,spring, washer and nut. Can you tell me the replacement kit I need to order . Thanks
 Reply

A  Answered on 9/23/2019 by InyoPools Product Specialist Matt S.

Hello - the replacement for your old Hayward C4020 the Clamp Assembly W/spring (dex2420j)
 Reply


?     Asked on 3/20/2020by Ernie

How do I assemble clamp parts?
 Reply

A  Answered on 3/23/2020 by InyoPools Product Specialist Lennox H.

Hi, Ernie. Instructions are available on page 3 of the Perflex Series Owner’s Manual
 Reply


?     Asked on 4/25/2020by tom

Does this include O ring (big one) if not where do i get it?
 Reply

A  Answered on 11/5/2020 by InyoPools Product Specialist Hector F.

Hi Tom, this clamp is used with the Hayward Perflex D.E. Filters and uses a diaphragm gasket not an o ring. Please see this parts diagram to see the diaphragm options. 
 Reply


?     Asked on 4/26/2020by edward g bain

will this clamp work on the harward DE-4800 filter ?
 Reply

A  Answered on 11/5/2020 by InyoPools Product Specialist Hector F.

Hi Edward, unfortunately, the clamp assembly for the Hayward Micro Clear model DE4800 is no longer manufactured with no listed replacement however you may be able to locate a used one somewhere. 
 Reply


?     Asked on 5/2/2020by John

Will this fit a Pentair, clean & Plus cartridge filter?
 Reply

A  Answered on 12/10/2020 by InyoPools Product Specialist Hector F.

Hi John, the clamp assembly for the Pentair Clean and Clear Plus series cartridge filter is part number 4600-1016
 Reply


?     Asked on 5/3/2020by Greg

Will this clamp work for a Hayward J2000 Super Star Clear?
 Reply

A  Answered on 1/7/2021 by InyoPools Product Specialist Hector F.

Hi Greg, unfortunately, this clamp is not compatible with the Hayward Super Star Clear model C-2000 cartridge filter. That clamp is obsolete with no listed replacement. You may be able to locate a used one or consider replacing the filter. A suitable model is a Waterway Crystal Water 325 sq. ft. cartridge filter
 Reply


?     Asked on 5/5/2020by James Wayne Wetzel

I need a replacement clamp for Hayward Swim Clear C4025 part # DEX2420J, what is the clamp part number?
 Reply

A  Answered on 12/9/2020 by InyoPools Product Specialist Hector F.

Hi James, the part number for the clamp on the Hayward Swim Clear cartridge filter model C4025 is 4811-100
 Reply


?     Asked on 5/11/2020by Pete

does this fit the Hayward DE 3600 filter? Thanks
 Reply

A  Answered on 12/7/2020 by InyoPools Product Specialist Hector F.

Hi Pete, unfortunately, this clamp is not compatible with the Hayward Micro Clear model DE3600 filter. That clamp is no longer available with no listed replacement. You may be able to locate a used one somewhere or maybe consider replacing the entire filter. You can use the Waterway Crystal Water D.E. filter model 570-0036-07
 Reply


?     Asked on 5/12/2020by richard E Drewes

can part f/EC-50C-ECX500C micro Clear assembly clamp be shipped overnight ?
 Reply

A  Answered on 1/6/2021 by InyoPools Product Specialist Hector F.

Hi Richard, unfortunately, the Hayward Micro Clear D.E. filter clap assembly is no longer fabricated with no replacement. However, you may be able to locate a used one. 
 Reply


?     Asked on 5/14/2020by Frank

Can you tell me the circumference of the band. I have a 20 year old band that I need to replace for an old purex triton 60 sq ft tank. Thank you
 Reply

A  Answered on 1/18/2021 by InyoPools Product Specialist Hector F.

Hi Frank, unfortunately, this band is not compatible with the Purex Triton series D.E. filters however if you can provide us with the specific filter model filter or send us a few photos then we can see if we carry the correct clamp assembly that you need. To supply photos simply click the reply link below and upload your photos or provide them quickest using our live chat feature. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 5/16/2020by Larry Feld

This is the clamp for the DE4820 ? and is it in stock?
 Reply

A  Answered on 12/4/2020 by InyoPools Product Specialist Hector F.

Hi Larry, the clamp assembly for the Hayward Pro-Grid Perm A Glass D.E. filter series is part number 4811-100
 Reply


?     Asked on 5/17/2020by Patrick

HI.. model NO. DE-3600 Hayward pool filter metal clamp assembly ring?
 Reply

A  Answered on 1/4/2021 by InyoPools Product Specialist Hector F.

Hi Patrick, unfortunately, no this clamp is not compatible with the Hayward Micro Clear filter model D.E.3600. That clamp is no longer available with no listed replacement. You may be able to locate one at a local pool retailer being older stock or possibly a used one somewhere. If you cannot locate one then you may want to consider a new filter. The Waterway Crystal Water 36 sq. ft. D.E. filter model is a compatible replacement. 
 Reply


?     Asked on 5/18/2020by Mike V

Will this fit of a Hayward DE-2400?
 Reply

A  Answered on 5/18/2020 by InyoPools Product Specialist Hector F.

Unfortunately, no as that clamp assembly is no longer manufactured with no listed replacement. 
 Reply


?     Asked on 5/26/2020by Curtis Allen

Will this fit my Hayward C 4000?
 Reply

A  Answered on 10/21/2020 by InyoPools Product Specialist Hector F.

Hi Curtis, unfortunately, this clamp assembly is not compatible with the model Hayward C4000 filter as the version that you need being manufacturer part number DEX2400J is no longer manufactured with no replacement. You might be able to locate this clamp at a local retailer being old stock or possibly a used one somewhere. 
 Reply


?     Asked on 5/31/2020by Curtis Allen

Will this clamp assembly fit my Hayward c4000BH filter?

 Reply

A  Answered on 10/20/2020 by InyoPools Product Specialist Hector F.

Hello Curtis. Unfortunately, this clamp is not compatible with your Hayward filter model c4000BH. Your clamp is no longer fabricated with no listed replacement. You may be able to locate another clamp at a local retailer or service company or look into possibly replacing the entire filter. If you need a new complete filter just let us know and we can recommend a model to you.  
 Reply


?     Asked on 6/28/2020by wes

will this clamp fit the Hayward DE4800
 Reply

A  Answered on 10/23/2020 by InyoPools Product Specialist Hector F.

Hi Wes, unfortunately, no this clamp is not compatible with the Hayward Micro Clear filter model D.E.4800. That clamp is n longer available with no listed replacement. You may be able to locate one at a local pool retailer being older stock or possibly a used one somewhere. If you cannot locate one then you may want to consider a new filter. The model W3DE4820 is the current replacement. 
 Reply


?     Asked on 7/15/2020by Inyo Visitor

Where is the date of model manufacture found as well as the model # itself?
 Reply

A  Answered on 11/17/2020 by InyoPools Product Specialist Hector F.

Hello, the date of manufacture can be found by getting the serial number off of the main filter label and contacting Hayward with it. 
 Reply


?     Asked on 12/6/2020by Leann

I have a Hayward c2025 filter and the T-bolt is bent on the clamp is there a replacement part I can get without replacing the whole clamp?
 Reply

A  Answered on 12/15/2020 by InyoPools Product Specialist Hector F.

Hi Leann, the nut & bolt part number for the clamp assembly on the Hayward Swim Clear cartridge filter model C2025 is 4811-102.
 Reply


?     Asked on 4/27/2021by Stephen P. Brainerd

I have a Hayward De-Le-42050. The clamp assembly has stripped bolt and nut. Do you have a replacement part?

 Reply

A  Answered on 4/28/2021 by InyoPools Product Specialist Charlie R.

Hi Stephen, Unfortunately, the clamp assembly for your Hayward Micro Clear D.E is no longer available. The only part we carry at the moment is the brass nut. You can view an exploded diagram with all of the parts HERE
 Reply


?     Asked on 5/11/2021by bill sarai

Will this model clamp belt fit my C4025?
 Reply

A  Answered on 5/11/2021 by InyoPools Product Specialist Robert M.

No, this clamp will not fit the Hayward C4025. The correct clamp assembly is part number 4811-100.
 Reply


?     Asked on 6/16/2021by Shanti

I have this Hayward W3EC50C93S Perflex1.5 HP Diatomaceous Earth Filter Pump System for Above-Ground Pools. My nut is stripped and need to be replaced. Can you let me know where to locate one? Also can you give me some suggestions on some above ground pool filter/pumps? I am not a fan of this one.

 Reply

A  Answered on 6/16/2021 by InyoPools Product Specialist Patrick P.

Hi Shanti, thanks for the photos! Here is the Perflex Nut you will require. I personally like this Pentair Optiflo Cartridge Filter System as the cartridge are simple to work with and not too expensive if it needs to be replaced. 
 Reply


?     Asked on 6/16/2021by Lisa harmon

Will this clamp ( or any clamp you have) fit a Hayward smart filter 450-550 series canister?
 Reply

A  Answered on 6/16/2021 by InyoPools Product Specialist Patrick P.

Hi Lisa, The clamp on this page is not the correct clamp. The Smart Filter 450 & 550 will require this 4811-100 - Clamp Assembly Kit - DEX2421JKIT Unfortunately we are currently out of stock on that item, I would suggest clicking the “Notify When in Stock Icon” located at the upper right corner of that page to be notified by email when we receive more stock of that item.
 Reply


?     Asked on 6/4/2023by Nicholas Clinton

Will this fit a Hayward DE 4800 filter?
 Reply

A  Answered on 6/4/2023 by InyoPools Product Specialist Hector F.

Hello Nicholas, unfortunately the clamp assembly for the Hayward Micro Clear model 4800 D.E. filter is no longer manufactured. You may be able to locate the clamp used from a local pool service/retail company. 
 Reply


?     Asked on 6/25/2023by Mark

Will this clamp work on the Hayward DE-6000 filter ?
 Reply

A  Answered on 6/25/2023 by InyoPools Product Specialist Hector F.

Hello Mark, the clamp assembly for your particular filter model is no longer manufactured with no replacement unfortunately. You may be able to locate a used one from a local pool retailer or service company. 
 Reply