?     Asked on 5/27/2015by Oren

Will this band fit the Wet Institute Modufilter tank. This tank has 3 cartridges inside as well. Thank you!
 Reply

A  Answered on 5/31/2015 by InyoPools Product Specialist Matt S.

Hello Oren, Unfortunately there is no information to confirm an answer as this part is no longer available.
 Reply


?     Asked on 6/1/2015by dave

Order states no longer available. Any Replacement part for the 18"
 Reply

A  Answered on 6/1/2015 by InyoPools Product Specialist Brian M.

I am sorry, buy we know of no alternative part for this. Sometimes single items or entire product lines just finally go out of production. I suggest giving Pentair Tech a call and see if there is something. THeir number is 800-831-7133. 
 Reply


?     Asked on 5/1/2016by Peter

I'm looking for a 18" x 3/4" clamp for a Amer Titan Vert DE Filter.
 Reply

A  Answered on 5/4/2016 by InyoPools Product Specialist Lennox H.

Hi Peter, The 18" Titan Clamp Assembly is no longer available and has no substitute.
 Reply


?     Asked on 6/10/2016by Brian O'Connor

I need a clamp for a wet institute DE filter, you no longer have the clamp. Where can I purchase one. Thank you Brian O'Connor Irmo, SC
 Reply

A  Answered on 6/20/2016 by InyoPools Product Specialist Lennox H.

Hi Brian, This part has been discontinued, I'm not sure where you can purchase one.
 Reply


?     Asked on 7/29/2016by James Hughes

Hello Have a Wet Institute Modufilter M165. Looking hard for the SS tank clamp. My original clamp had 2 half circle portions making an 18 inch diameter circle. One of the 1/2 circle clamps is fractured, the other is fine. Tried to weld the fractured part but not good ! Know replacement clamp not available but hoping I can find even a used 1/2 circle clamp somewhere. My bolts OK Please help if possible. Jim Hughes Austin Texas
 Reply

A  Answered on 7/31/2016 by InyoPools Product Specialist Lennox H.

Hi James, Unfortunately, I don't think you can find another half of that clamp assembly. I'm not sure where you can find one.
 Reply


?     Asked on 9/14/2019by george

I nned a band clamp for a american products stainless steel filter 48 sa ft. Part numbers that I have found are: Model no. 18100 filter 6715-0405 clamp 530030 same clamp
 Reply

A  Answered on 9/19/2019 by InyoPools Product Specialist Megan C.

The filter is the American Products Titan Stainless Steel D.E. Unfortunately, the clamps for this filter are discontinued without replacement. 
 Reply


?     Asked on 6/6/2020by Scott

I am looking for a filter clamp for Titan DE Stainless Steel 36 cubic foot filter. 18" I believe, and or something that's compatible. TYIA
 Reply

A  Answered on 6/9/2020 by InyoPools Product Specialist Hector F.

This would be the correct clamp assembly for models manufactured before 11-94 and part number 4655-09C is the clamp assembly for models after 11-94. You may need to try and locate the serial number on the unit and confirm with the manufacturer the date it was fabricated. Currently, we are out of stock of those of these clamps with no listed lead time.  
 Reply