I see the response that this clamp is correct for a NS48, but just wondering if the 22" is the diameter? The diameter is close to 22", but closer to 21 so just wanted to confirm this will work on the Nautilus NS48. Thanks!
Reply
HI Dennis, The Clamp Assy.18" NS & PF35 (181011) would work on the Nautilus NS48 Filter.
Reply
will this replace an older nautalis nss48 clamp?
Reply
Hello, According to the Pac Fab Nautilus Stainless D.E. Parts diagram, yes this clamp is the correct replacement part for the Nautilus NS48.
Reply
Hello, My OLD Natilus DE filter clamp is finally broken--the filter measures 36 inches around-will the 18" clamp work-is it actually 36" when put together? Or, is the whole thing 18" circumference?
Reply
Hi, This 18" Clamp Assy-181011 can be used with the Pac Fab Nautilus Stainless D.E. Filter.
Reply
Hi, I am writing from Denmark (Europe). I have a Seablue Rapid rate sandfilter where the clamp assi. has broken! Is it possible to bue a new one at your company? I also need a rubber O-ring.
The filter has Model no. 44VX2 and Serial no. 310337 and I think it is 18"
What would the total price be including sending to Europe? You can send a offer to my e-mail address.
Best regards
Flemming
Reply
Hello Flemming- The clamp I found is this Clamp,assy.18" Ns & Pf35 (181011). The cost of that item is 193.99, shipping to Denmark will be about $99.99 and will take approximately 3 weeks.
Reply
Is this the correct clap for the pac Fab Challenger? The fiberglass container is 18"in diameter.
Reply
Hi, David. It is not, you will need the Band, Clamp Assy. Complete - 355320. For additional replacement parts reference the Pentair / Pac Fab Challenger Parts Diagram.
Reply
I have a in-ground pool.
Metal ring that goes around pool filter to keep top and bottom connected-- need a new clamp.
Purex triton Nautilus -FNS
08 F FNS 48
i think this is the right serial number and model-- if you need more info please let me know
Reply
I have a pre-1993 DE Nautilus or Pentair filter. The Metal Band that holds the top and bottom parts together broke. It has 2 sets of numbers stamped on the band: LF3 and 19-5151. It is 1 3/4" wide. Do you have it?
Reply
Hello, Are you able to send a picture of your filter with any part numbers on the unit?
Reply
I have an old fiberglass filter which reads Nautilus DNS. I purchased a new 36 DE grid filter for it 3 months agoThe band clamp broke and I can not find a replacement. The band is 2 piece two bolts and two 1/2 inch nuts. The band is not flat. Circumference filter is 60 inches. The bands height is 1.5 inches. Cant make out serial # Would include pictures but on I phone. If you come back I will send them to your address. Thank you. Appreciate your insight. Regards, Peter
Reply
I have a PacFab (triton) nautilus fns 36. The T bolts are bent. Where Can I buy replacement t bolts?
Reply
Unfortunately the entire clamp would need to be replaced.
Reply
The T bolt i snot available as a separate item
Reply
Sorry but the t bolts are not sold separately.
Reply
My filter is older, labels Nautilus NS-36 - will this clamp assembly fit to replace what I have now?
Reply
This Clamp Assembly 18" - 181011 is the correct clamp band for a NS-36 depending on how old the filter is, you had mentioned it was an older filter but did not give a date - see note - "Filters made before 4/1/92 contain a different clamp band assembly. Replacement clamp band components are no longer available for those units. Do NOT attempt to interchange components between the different clamp band designs."
Reply
This clamp will fit the older NS-36.
Reply
Yes, it is the replacement for the original.
Reply
I have a Pac Fab Mitra MA-160. Will this clamp fit this filter?
Reply
Hi Robert, Unfortunately, this does not fit the Mitra and the Mitra Clamp Assembly is no longer available. It might be time for a new filter maybe something like this Clean & Clear 150 Filter
Reply
Will this clamp fit a Hayward De-3600?
Reply
Unfortunately this does not fit the Hayward DE3600 filter and the Hayward DE3600 filter clamp is obsolete without a replacement. It may be time for a new filter something like this Hayward Pro Grid 36 Sq. Ft. Filter Your current valve will fit this filter.
Reply
What is the appropriate clamp for FNS Plus 60?
Reply
Hello David. The appropriate tank clamp for the Pentair FNS Plus 60 DE Filter is Clam Assembly FNS Plus, part number 190003. Clamp Assembly, PT5000/Clean & Clear Plus/FNS Plus - 190003 Attached please find an exploded parts diagram of the Pentair FNS Plus DE Filter for reference. Pentair FNS Plus D.E. Filter
Reply
will this fit my Pentair FNS60. I do NOT have the FNSP.
Reply
Hi Ann, this will not fit your Nautilus FNS filter. If your filter was made after 1993 you will need this Band Assembly (195351). The height of the clamp is the best way to identify it; the post-1993 ones are 2-1/8" tall and the old (obsolete and no longer made) clamps are 1-3/4" tall.
Reply
I have a Pacfab Seahorse Stainless Steel Filter Unit. It's so deteriorated that it is hard to find a specific model number. I do see options of SH300, SH400, and SH500 in regard to cartridge filter parts. My clamp has the number 15-2121 stamped on it. Which clamp would fit this specific model?
Hello Mike. The Pentair Pool Products Clamp Assembly 181011 is compatible with the Pentair/Pac-Fab Sea Horse Stainless Filter (all models). Clamp Assembly 18" NS & PF35 - 181011 Attached please find a copy of the Pentair/Pac-Fab Sea Horse exploded parts diagram for reference. Pac Fab Sea Horse Stainless
Reply
I have a American Titan SS DE fliter Pre-1991, 60Sq. ft filter area, Model 586090, sn 65622
Will the Pentair 181011 Clamp assembly work on this filter?
Reply
Hello Lennie, Please click here to view the American Products Titan SS DE filter parts diagram. Key numbers 5 and 6 list the clamp and filter o rings we also recommend to replace at the same time.
Reply