?     Asked on 1/24/2015by Taed

I have a 1.5hp model k48m2pa105c4 (SQ1152). What fan do I need?
 Reply

A  Answered on 1/26/2015 by InyoPools Product Specialist Robert M.

Hello Taed - The correct fan is part number SAW-48 (5271-04).
 Reply


?     Asked on 5/23/2015by James

What cooling fan is the correct one for MOD. #C48L2PA105C4 (A O Smith Corp.), and the Bearings Thank you....
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Patrick P.

Hi James, Here is the Cooling Fan for the C48L2PA105C4 this motor uses two of the 203 (6203) Bearings.
 Reply


?     Asked on 8/1/2015by Bryan

what cooling fan do I need for a c48k2n143c1c ?
 Reply

A  Answered on 8/7/2015 by InyoPools Product Specialist Joe S.

Hello Bryan, Fan,cooling Plastic Ammo-se (saw-54) PART#5271-02
 Reply


?     Asked on 8/20/2015by John Bonfardice

I have a A.O. Smith motor on my pool filter model # K48K2N104, Serial #8C03. Which cooling fan and bearings do I need. Thank You
 Reply

A  Answered on 8/21/2015 by InyoPools Product Specialist Joe S.

This Part # 5271-04 will be the cooling fan for the K48K2N104
 Reply


?     Asked on 3/16/2016by Bob Beal

I have a A.O. Smith motor on my pool filter model # K48M2PA104A2, Serial #8J014. Which cooling fan do I need. Thank You
 Reply

A  Answered on 3/18/2016 by InyoPools Product Specialist Lennox H.

Hi Bob, This is the cooling fan used in the K48M2PA104A2 motor.
 Reply


?     Asked on 3/27/2016by Inyo Visitor

what cooling fan do i need for a k48M2PA!05 Motor USQ1202
 Reply

A  Answered on 3/28/2016 by InyoPools Product Specialist Joe S.

Hello, yes the Cooling Fan, Id 25/32in O.d. 4 3/4 In (saw-48) will work for the USQ1202.
 Reply


?     Asked on 8/5/2016by Tim

Hello, I have a C48L2PA105 1 1/2 HP motor, is this the correct cooling fan?
 Reply

A  Answered on 8/12/2016 by InyoPools Product Specialist Lennox H.

Hi Tim, This is the correct cooling fan for the C48L2PA105 motor.
 Reply


?     Asked on 9/13/2016by John

Hi, I have a PD2HE-I Sta Rite pump that needs a new internal cooling fan. I have tracked it down to this but would like it to be confirmed please. Thanks
 Reply

A  Answered on 9/13/2016 by InyoPools Product Specialist Stacey M.

Hello John, yes 5271-04 cooling fan would be right to fit with PD2HE-I Sta Rite pump
 Reply


?     Asked on 10/10/2016by steve james

i have a flotec with a.o. smith motor model # c48j2pa105c1 i am needing the inernal cooling fan. wich one do i need
 Reply

A  Answered on 10/12/2016 by InyoPools Product Specialist Scott W.

The correct cooling fan for that motor is part number 5271-02.
 Reply


?     Asked on 6/9/2017by Peter

I have a motor USQ1072 -48Y and I need an internal cooling fan. Which is the correct replacement fan to order please? Peter
 Reply

A  Answered on 6/9/2017 by InyoPools Product Specialist Hector F.

The correct fan for the model USQ072 is the part number 5271-02.
 Reply


?     Asked on 8/22/2017by JAVIER COLMAN

GOOD AFTERNOON I HAVE A MOTOR A.O SMITH K48M2N111 WHAT WOULD THE FAN AND THE PUMP SWITCH AO Smith
 Reply

A  Answered on 8/24/2017 by InyoPools Product Specialist Lennox H.

Hi, Javier. This Cooling Fan - SAW-48 will fit the K48M2N111  motor. 
 Reply


?     Asked on 3/3/2018by Inyo Visitor

I need a cooling fan for a Blue Torrent 1 hp motor Model ACIMP1000. It appears to be identical to the A O Smith but I'm unsure. Could you tell me what fan I need?
 Reply

A  Answered on 3/5/2018 by InyoPools Product Specialist Lennox H.

Hi. We're able to confirm if the Century/A.O. Smith motor parts will fit the Blue Torrent motor. 
 Reply


?     Asked on 7/5/2018by Inyo Visitor

I have a model C48J2N13181 3/4 HP motor, ser # 09511FM . what fan do iI need and is it hard to remove old one from the shaft?
 Reply

A  Answered on 7/5/2018 by InyoPools Product Specialist Lennox H.

Hi. You will need Part # SAW-54, for removal and installation instructions, check out our How To Replace the Bearings in a Pool Pump Motor - Part I and Part II
 Reply


?     Asked on 6/12/2019by Francisco

This fan works on my ST1302V1. Thank you.
 Reply

A  Answered on 6/13/2019 by Industry Professional

Hi, Francisco. Yes, this is the correct replacement Cooling Fan. 
 Reply


?     Asked on 9/9/2019by Adam

c48l2ec11c3 Model number for AO Motor I ordered a cooling fan saw 48. It does not fit. Can you tell me what the proper size is.
 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Michelle B.

Unfortunately no. That is an older model # per the mfg & they are not able to confirm the correct cooling fan. If you have the original we will need the specs on it.
 Reply


A  Answered on 9/10/2019 by Industry Professional

Unfortunately no. That is an older model # per the mfg & they are not able to confirm the correct cooling fan. If you have the original we will need the specs on it.
 Reply

  • Commented on 9/10/2019 by Product Owner

    c48l2ec11c3 Model number for AO Motor I ordered a cooling fan saw 48. It does not fit. Can you tell me what the proper size is. unfortunately the old one was damaged. what I can tell you is the SAW48 OD is correct and is the same as the old The ID of the SAW48 is .75 where the old ID is .67. Hope this helps. Thanks
     Reply

    • Commented on 10/16/2019 by InyoPools Product Specialist Lennox H.

      Adam, Unfortunately. we do not have the cooling fan used with your motor. 
       Reply