?     Asked on 5/25/2015by jeff marrero

I just wanted to make sure that this ring is compatible with sta rite pld50?
 Reply

A  Answered on 5/25/2015 by InyoPools Product Specialist Hector F.

Yes it compatible with the PLD50.
 Reply


?     Asked on 6/7/2015by Tim Boissonneault

How do I know this is the right size? Returnable?
 Reply

A  Answered on 6/7/2015 by InyoPools Product Specialist Patrick P.

Hi Tim, Yes this item is returnable. Your filter should have a label on the side and if it says PLM 100, 125, 150, 175, 200, 300 or PLD50 or PLD70 then this is the correct o-ring for you. The o-ring on this page was for these models of filters from 1997 to current, if your filter is before 1997 then you would require the 27001-0060S o-ring.
 Reply


?     Asked on 3/2/2016by Bruce

Will this fit a PLDE 48 . Did not see it listed . Thanks
 Reply

A  Answered on 3/2/2016 by InyoPools Product Specialist Lennox H.

Hi Bruce, This O-ring will fit the PLDE48 Filter.
 Reply


?     Asked on 5/3/2016by James Kennedy

The cord ring I have is a little stretched out. Is there a way to shrink it a little? It's been fine until this year
 Reply

A  Answered on 5/5/2016 by InyoPools Product Specialist Charlie R.

James,No, unfortunately due to wear and tear, once an o-ring stretches out, you can't shrink it back to the original size.
 Reply


?     Asked on 5/22/2016by Jim

Is this the correct replacement o-ring for Model AT8230?
 Reply

A  Answered on 5/22/2016 by InyoPools Product Specialist Patrick P.

Hi Jim, Yes this is the correct replacement o-ring for the Aqua Tools Model AT8230
 Reply


?     Asked on 6/7/2016by Chuck

I bought my filter used years ago. How can I tell if it's pre or post 1997? Thanks!
 Reply

A  Answered on 6/7/2016 by InyoPools Product Specialist Brian M.

Good day. I spoke to a technician at Pentair ( who now ownes Sta-Rite ) and one of the older Sta-Rite techs and he said that the Pre 97 o-ring is thicker than the Post-97. His suggestion was to purchase the Post-97 and, if need be, just add extra lube to complete the seal. Unfortunately, there is no other difference in the tank configuration to tell the time period, other that the sticker with either the pump model or the serial number. Pentair would be able to then tell you the year of the filter tank. If you can find either of those, please give Pentair a call at 800-831-7133.
 Reply


?     Asked on 7/1/2016by linda

will this fit model # AT6230
 Reply

A  Answered on 7/1/2016 by InyoPools Product Specialist Lennox H.

Hi Linda, This Cord-Ring (27001-0061S)  will fit the AT8230 filter.
 Reply


?     Asked on 7/3/2016by Jim

will this ring fit my Sta Rite PLD 36?
 Reply

A  Answered on 7/5/2016 by InyoPools Product Specialist Lennox H.

Hi Jim, This Cord-ring (27001-0061S) will fit the PLD70 filter that was manufactured after 03/97.
 Reply


?     Asked on 6/5/2019by Patrick Willy

How Can I tell which one I need? I dont see a manufacture date.

 Reply

A  Answered on 6/5/2019 by InyoPools Product Specialist Lennox H.

Hi, Patrick. You can measure the o-ring that you have. The 27001-0060S Pre-3/97 is 15-11/16" ID, 3/8" and the 27001-0061S 3/97-Current is 15-1/4" ID, 3/8".   
 Reply


?     Asked on 6/8/2019by Richard Robinson

I have an Aqua Tool At 8230 Filter What part do I need that replaces the O Ring
 Reply

A  Answered on 6/8/2019 by InyoPools Product Specialist Lennox H.

Hi, Richard. We will need to know the age or manufactured date of your model. If you don't know that, you can measure the old ring. 
 Reply


?     Asked on 6/10/2019by Richard T Robinson

I have an Aqua Tool A8230 Pool What O ring would I need to replace the old one.Filter was bought in 2009
 Reply

A  Answered on 6/10/2019 by InyoPools Product Specialist Patrick P.

Hi Richard, Yes this is the proper o-ring for an Aqua Tools AT8230 Filter from 2009
 Reply


?     Asked on 6/11/2019by Tiffany

Hi I have a aquatools filter. Model #AT84150. Would you have the ring for this filter?
 Reply

A  Answered on 6/11/2019 by InyoPools Product Specialist Lennox H.

Hi, Tiffany. Yes, if it was manufactured after 03/1997. 
 Reply


?     Asked on 6/24/2019by Duke

I have a Aquatools AT8230 filter. I need a new O-Ring. My manual lists the Part # 27001-0060. Do you know if this is a suitable replacement? Thanks.
 Reply

A  Answered on 6/25/2019 by InyoPools Product Specialist Kevin G.

If your filter was installed before March of 1977, then part 4686-22 will be the correct one for you.
 Reply


?     Asked on 6/28/2019by Debbie Barry

will this o ring fit my s-PLM320 filter manufactured 3-20012
 Reply

A  Answered on 6/28/2019 by InyoPools Product Specialist Lennox H.

Hi, Debbie. Yes, this Cord Ring (3/97-Current) - 27001-0061S will fit your model filter. 
 Reply


?     Asked on 6/30/2019by Ted

Will this fit a .model PLD70 STAR RITE SYSTEM 2 ?
 Reply

A  Answered on 7/17/2019 by InyoPools Product Specialist Hector F.

Yes, the 27001-0061S cord ring is the correct one for your PLD70 filter manufactured from 3/97- current. 
 Reply


?     Asked on 8/31/2020by Cynthia Ruland

Wanting to confirm this fits the Sta-Rite System 2 Filtration - Model PLM150
 Reply

A  Answered on 10/28/2020 by InyoPools Product Specialist Hector F.

Hi Cynthia, yes this cord ring is compatible with the Sta-Rite model PLM series filters manufactured from 3/97 to current models. If you are not sure then you can either contact Pentair at 1-800-831-7133 with the serial number on the filter or advise us and we can confirm for you.    
 Reply