I'm needing a Jandy P/N 7236 Check Valve 2" piping . I have a spa/pool comb. Water is draining from spa to pool when turned off when turned back on from pool to spa is this what I NEED or a divertor valve or actuator valve. Confused PLEASE HELP !!!
Reply
Hi J.W., If you already have the Jandy Check Valve (7305) installed and need to replace the flapper assembly then p/n 7056 is the correct part you will need. You will need a check valve along with a diverter valve. A check valve stops the water from draining out of the spa and a diverter valve will direct the water flow between the pool and spa.
Reply
I am looking for a replacement Jandy Check Valve. The part number is 7236 REV. I can not seem to find this part on your website. Any assistance would be appreciated. Thanks.
Reply
Hi, Gregory. The Cover With Flapper Assy & O-ring (7056) is the correct part for your valve with p/n 7236 stamped on it.
Reply
My Check Valve does not have any part numbers on it but it does have 8 screws on it. Onto top it has an arrow indicating flow to spa. I would like know which would be the right check valve. Thanks
Reply
Hi, Antonio. Unfortunately, with a valve model or part number, I will not be able to tell you which parts you'll need.
Reply