?     Asked on 6/16/2015by Pam

I have an older in ground pool and my plastic cover on the pump is cracked. The rand is Whisper Flow model. WFE-24. C. Serial #1195-010 Is the above model a replacement?
 Reply

A  Answered on 6/18/2015 by InyoPools Product Specialist Lennox H.

Pam, If you have the old style Whisperflo that uses the S.S. Clamp Assy you will the Old Style Clear Cover (070795) along with the Old Style Lid O-ring  or if you have the current style that uses the Lock Ring (357199)  you will need the Lexan Cover (357151) along with the Lid O-ring (350013)  .
 Reply


?     Asked on 3/9/2016by Graham Wilson

I have a whisperflo pump installed in 1994 as a booster pump to my pool fountain. As such, it has not been used much and still works well. However, the cover has become brittle and cracked from sun exposure. Replacements I have ordered do not fit properly. Will this part 070795 work with my 1994 model. Unfortunately, the label with the model number also has faded beyond reading.
 Reply

A  Answered on 3/10/2016 by InyoPools Product Specialist Lennox H.

Hi Graham, This Lexan Cover will work on the older model Whisperflo pump prior to 1996, that uses the SS Clamp Assy (070711).
 Reply


?     Asked on 4/13/2016by Inyo Visitor

My older Whisperflo Purex Triton plastic pump cover is cracked and I need to replace it. On the plastic pump cover is P08080. ID on the pump includes NSF, D026989, WFE-4, 1.66, 0498-161 AP, 1.0 HP. What pump cover should I purchase from your company on-line that will work/fit correctly? Thank you, Mike
 Reply

A  Answered on 4/14/2016 by InyoPools Product Specialist Alan M.

Hello, the Cover, Clear Lexan (070795) is the correct replacement pump lid cover for part  #P08080 on the Whisperflo Pump.
 Reply


?     Asked on 7/26/2016by Danna

We have a whisperflo wfe 12c Pyrex triton pump with a cracked cover. Pool was built circa 1997. Is this the right part? Thanks
 Reply

A  Answered on 8/2/2016 by InyoPools Product Specialist Lennox H.

Hi Danna, This cover will work if you have the older clamp-on style housing.
 Reply


?     Asked on 9/11/2018by Robert Dawson

The plastic cover on my Whisperflo pump unit has cracked (Model WFE-2 with a 7 inch cover and a clamp assembly). The pool is very old (over 40 years) but I am not sure when the Whisperflo unit was installed. I think that your cover Part # 070795 will work. Am i right? If not, what is the right part Number? Thanks.
 Reply

A  Answered on 9/11/2018 by InyoPools Product Specialist Hector F.

Yes, that is the correct lid for the old style which uses the clamp assembly. 
 Reply


?     Asked on 7/2/2020by sgw

I have this nearly identical lid, but mine has a 6 1/2" lip whereas yours has a 5 3/4" lip. Can you help me with a replacement?

 Reply

A  Answered on 11/20/2020 by InyoPools Product Specialist Hector F.

For us to suggest the proper lid could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo. Once we get this photo we can make the proper recommendation for the lid.
 Reply


?     Asked on 1/23/2021by Daniel

Is this the correct lid for WFE-8

 Reply

A  Answered on 1/27/2021 by InyoPools Product Specialist Hector F.

Hi Daniel, yes this is the correct pump lid for the Pentair WhisperFlo pool pump model WFE-8 old series. 
 Reply